Happens to most... LOL And the only reason I am replying to the group to your message is just to remind everyone that when you run into a newb in their initial set-up, make sure this is first on their list 'after' getting your local network config set-up. And it may be a good command line and file structure learning experience for some. Plenty of tutorials on the web. I have wished we all were using UTC in our hardware clock and adjusted time zone in software clocks for a very long time now. Then everyone would be on the same page so to speak. But as you build out other external functions, you might very well find that a improper time setting can create other problems. Anyway, glad you got it straight. ...mike/kb8jnm On 5/9/2018 9:38 AM, lengriff@optimum.net wrote:
After installing ASL, I found the ' Time ' on my repeater to be incorrect. Turns out, the ' timezone ' was not set correctly. I restet it by using #dpkg-reconfigure tzdata, now all is fine.
Len WB2HKK _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.