I don't know about using the AllStar SIP service for non-amateur applications…. I'm guessing the AllStar SIP service helps support the AllStar project financially. There are plenty of SIP providers out there, but I normally use Vitelity.com and voip.ms as my SIP/IAX trunk providers. They've been reliable and are easy to deal with. Vitelity has a special PAIF deal that gives you a half price deal on some trunks with more or less unlimited incoming, but I mostly use the dollar a month trunks from both providers with metered usage at a penny or so a minute… (At a dollar a month I can do fun things like having a local DID number in my home town so my parents can call me with a seven digit local call…) Some of my systems are running high enough call volume that they would be abusing the unlimited trunks that are intended for residential/SOHO applications. Another good reason for the dedicated AllStar box: Later on, when I need another radio, I can add a URI to the existing AllStar PBX or I can use an RTCM to attach a non-local radio. On Feb 17, 2013, at 9:32 PM, Shane Morris <edgecomberts@gmail.com> wrote:
Just as a point of interest, could you use the AllStar SIP service for commercial (ie, non amateur) applications?
However, your configuration you describe is pretty much what I envisage...
On Mon, Feb 18, 2013 at 4:13 PM, Don Hackler <donh@sigma.net> wrote:
While improved security is a factor, the main reason for separate installs is that AllStar/app_rpt runs on a forked asterisk distribution based on Asterisk 1.4 and PAIF runs on much later Asterisk versions. Asterisk 1.8 is the oldest stable distro for PAIF you would want to run on a new install.
The main reason for the fork is that AllStar/apt_rpt runs on the Zaptel framework and the newer Asterisk versions don't support Zaptel. The app_rpt that is in the current Asterisk distributions was pretty much abandoned in place.
PAIF offers a much nicer web-gui PBX operation and is substantially easier to run for general purpose PBX situations. Out of the box, PAIF has several dozen nice features already running while the Acid/AllStar distro is very much a totally stripped down basic command line driven system.
If all you are going to do is glue a couple of radios together and maybe hook up one SIP trunk, then just use the ACID AllStar distro. It's fine for that, preferably using the AllStar SIP trunk service, since the configuration is well known and it's inexpensive.
I run several PAIF installations all tied together in a fairly large network, serving SIP phones at several locations. The single ACID AllStar distro running on a dedicated box appears to my larger network as a single extension that happens to be a radio.
On Feb 17, 2013, at 3:28 PM, pete M <petem001@hotmail.com> wrote:
What would this kind of setup give aside more security?
Envoyé de mon iPad
Le 17 Feb 2013 à 17:45, "Don Hackler" <donh@sigma.net> a écrit :
Begin forwarded message:
From: Don Hackler <donh@sigma.net> Subject: Re: [App_rpt-users] Suitability of boot media Date: February 17, 2013 2:44:31 PM PST To: Shane Morris <edgecomberts@gmail.com>
You will need to run PAIF and AllStar on separate boxes. Use IAX to connect the two.
If you only have one outside IP address, you can put change AllStar to use a different port for it's outside IAX connection to the AllStar network and then the PAIF box can use the standard IAX port (if needed). Your the PAIF box to connect to the usual VOIP trunk providers.
Use the 32 bit Centos 6.3 PAIF distro and install PAIF Purple for a stable setup. (Asterisk 1.8, FreePBX 2.10)
For light duty applications, I've heard good reports about running PAIF on a Rasberry Pi, but that's still a bit experimental.
On Feb 17, 2013, at 1:05 PM, Shane Morris <edgecomberts@gmail.com> wrote:
Hi all,
I am supposed to be having a HP T5630w thin client delivered to me today, and I was planning to install PBX In A Flash on it, which was recommended by one of the members of the list.
First up, can I install from say a 1GB stick to a 8 or 16GB stick, and leave the larger stick semi-permanently in the machine as boot media under the cover at the top? The thin client is quoted with only a 2GB IDE SSD, certainly not enough for this OS, and I don't want to wait another couple of weeks for postage on a 32GB IDE SSD.
Next question, which is the best version of PIAF to get? Nowhere that I can see does it quote which version of Asterisk its using or whether it would be suitable for use with the correct version for app_rpt (which is 1.4 as I take it from numerous discussions).
Last question - this'll be running on the thin client, and as we know, there are *some* security issues with 1.4 (of course, theres probably security issues with 1.8 too, but they haven't been exploited yet, so I'm not bashing 1.4, I know no piece of networked software is totally secure) so would you recommend using this "repeater controller" box on an IAX trunk to a 1.8 "PABX controller" box, and let the PABX face the world? I fully intend on using the internal but offsite connections over a VPN, but to get to the outside world and onto the PSTN it needs to go through my ITSPs, Exetels, indial account(s).
Of course, if this is recommended, which I strongly suspect it is, I'll have to get another thin client and load 1.8 on it, and establish the IAX trunk, which I imagine would be a simple exercise.
Thanks in advance for all your help!
Shane.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
<Mail Attachment.txt>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users