Jon, The message appears on the console of the receiving node if logged in. It is not sent to the log it does not seem to trigger a "event" It does not show up in debug It is not spoken 73, Steve N4IRS On 4/5/2016 2:09 PM, Jon Rorke wrote:
So what does the receiving node do with the incoming text msg?
Does it display on the console or does it make Allison speak the text message over the air? Jon RQ
On 4/4/2016 3:26 PM, Steve Zingman wrote:
Larry, To send a text message from a DIAL node to a another node you will need to edit /etc/asterisk/modules.conf change: noload => app_sendtext.so to load => app_sendtext.so and restart asterisk. This will be fixed in future revisions of DIAL
from the asterisk cli the command would be" CLI> rpt cmd your node number ilink 9 destination node number,"This is a test"
Send a text message of This is a test from node 2154 to node 2100: rpt cmd 2154 ilink 9 2100,"This is a test"
The message has to be either 1 word or enclosed in quotes. Notice the comma after the destination node number.
This is also valid from the cli: rpt sendtext 2154 2100 "This is another test"
As a DTMF command, the entry for 809 wont do anything. You could have: 809 = ilink,9,2100,"Testing ..." would send a text message to node 2100 or, 809 = ilink,9,0,"Testing ..." Which would send the text message to all connected nodes.
Hope that helps.
73, Steve N4IRS
On 4/3/2016 2:28 PM, larry wrote:
Recently I installed a Dial version on a RPi2
In it includes command to use ilink,9 to send a text message to another node. I am unable to find additional info about ilink,9 and how it works.
Could someone give me an explanation if how to utilize it? Also what if anything needs to be pre-configured locally or at the receiving node to use this function.
A command syntax example would be nice as I am confused by the comment following the defined DTMF of 809 Rpt.conf defines .... 809 = ilink,9 ; Send Text Message (9,<destnodeno or 0 (for all)>,Message Text, etc.
Thanks
Larry - N7FM
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--- This email is free from viruses and malware because avast! Antivirus protection is active. https://www.avast.com/antivirus
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic