cor high or low? -- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings... On Jun 5, 2013, at 12:38, Geoff <w5omr@att.net> wrote:
It -really- can't be this hard...
The Service manual for the R100 is at http://www.repeater-builder.com/motorola/r100/uhf-r100-service-manual-688107...
On page 58 is the output of Jaux
I'm using pins 14 - gnd 15 - spk hi 16 - Mic hi 17 - Mic gnd 18 - PL monitor (active low) 19 - PTT (active low)
Corresponding Pins on the DMX URI ~should~ be (I would think)
URI R100 Jaux 1 PTT 19 PTT 8 COR 18(*) PL Monitor 24 Ain 15 Spk Hi 12 Aout 16 Mic Hi 13 gnd 17 Mic gnd 13 gnd 14 gnd
So... when I plug it in, the R100 keys up, and running radio-tune-menu, nothing works.
(* = I use COR for PL monitor, because my R100 uses DPL (DCS) and not CTCSS.)
Thoughts?
-Geoff/W5OMR (29655)
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users