Hi Tim, Thanks all for the replies. I was trying to pass the tones via RF. Not to the next node per say. 73 de Angelo ----- Original Message ----- From: "Tim Sawyer" <tim.sawyer@mac.com> To: "Buddy Brannan" <buddy@brannan.name> Cc: "app_rpt mailing list" <app_rpt-users@ohnosec.org> Sent: Thursday, February 20, 2014 9:10 AM Subject: Re: [App_rpt-users] Touch Tones Yes, Buddy you have it right. Let’s break it down: * is the prefix, AKA the function (or start) character. http://ohnosec.org/drupal/node/133 4 is command mode (you exit with #). http://ohnosec.org/drupal/node/21 0 is a shortcut for last node number So for propagate_dtmf to work you have to connect to the remote node and then go into command mode. -- Tim :wq On Feb 20, 2014, at 6:30 AM, Buddy Brannan <buddy@brannan.name> wrote:
Wouldn’t it have to be *4[node number] to guarantee that you’re commanding the right node? *4 is the command to send commands to a remote node, thus *40 would specify to control the most recently connected node, is that not correct? Or did I get the wrong end of this?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.