A permanent link is one that automatically reconnects if the IP network fails or if the far end node goes away and returns. ilink,6 is supposed to disconnect all links including permanent links. On monitor; the status from one end should say monitor, but it may not be the end you are expecting. Try both sides. -- Tim :wq On Oct 3, 2013, at 2:49 PM, Mark Johnston <markjohnston73@gmail.com> wrote:
Does anyone know what is up with the permalink command
I have it setup as this:
76=ilink,12 ; Permanently connect specified link -- monitor only 77=ilink,13 ; Permanently connect specified link -- transceive
When I do *7628344 from my private node 1001 it connects but will not stay when I disconnect all aka *71... also when I do a status on 28344 it says transceive... not the monitor only.
Is there a diff iLink i should use to disconnect all 'non-permalink' links?
71=ilink,6
Thanks...
Mark KC7DMF
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users