There's a new version 8.7.1, thanks to N4IRS, which can be downloaded from the links here: http://wiki.allstarlink.org/wiki/Main_Page#Related_Links Only the install has changed, it asks more questions. Will allow static IP during install if no DHCP is found. On Mon, Oct 16, 2017 at 9:24 PM, Benjamin Naber <Benjamin@project23d.com> wrote:
For those installing the DIAL 8.5 distro, it is confirmed to work on a Dell Latitude D531. It has 2.5GB RAM, and I selected the 32bit install.
Might I suggest that new installs go through the firsttime setup process, and then modify the asterisk conf files as you see fit.
Appears denying the firsttime and just copying config files (from an machine whose HDD was making funny noises) does not work. Only nodes that I had at the bottom of the rpt.conf would work.
... while the original install did work, and would register with ASL, I could not connect to other nodes.
RTFM strikes again!
~Benjamin, KB9LFZ _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim