[App_rpt-users] RTCM Inbound (Eth Rx) packet out of bounds

Thanks for your reply Pierre, I read on the forums here that a lot of users put their RTCM's into 10Mbps 1/2 duplex, as it fixes stability issues with the Ethernet. In fact it is that by default when you load the firmware. The only other device on the network LAN at the main site is the repeater controller (running at 100Mbps). The test one at home is running into a 16 port switch with many other computers connected to the switch. I'm not sure how much broadcast traffic is sent around however. Hayden