It’s the same as ACID… 2 steps: in rpt.conf rplace rxchannei with rxchannel = Voter/<your node> ; Rx audio/signalling channel add a voter.conf [general] port = 667 password = BLAH buflen = 250 utos = y [<your node>] YourSiteName = yourClientPassword,transmit ;thresholds = 255,110=5 ;linger=8 ;txctcss = 100.0 ;txctcsslevel = 100 ;txtoctype = notone ;plfilter = no — 73, Allstar Admin, WD6AWP allstarlinks@gmail.com https://allstarlink.org http://ohnosec.org/drupal/ Please help lighten the load on your Allstar admins and help others learn from your questions. Always ask technical questions on the users list at http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users.
On Jun 20, 2015, at 7:57 AM, Fran <baldwin88@yahoo.com> wrote:
Hello I am trying to link an RTCM to a Rasberry PI 2 system, any definite configurations would be appreciated.....
Thanks _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.