All, Reinstalling after a HDD crash, ACID (centos5) downloaded off the website (burnt to DVD). The original install went without a hitch about a year ago, however now it is not asking me for the network settings. As a result, I cannot download the phase2.sh script. I'm a noob to Linux, your help is appreciated. Thanks! On Aug 31, 2016 6:29 AM, <app_rpt-users-request@ohnosec.org> wrote: Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org You can reach the person managing the list at app_rpt-users-owner@ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Fw: cop command 2 and 3 disable enable (petem001@gmail.com) 2. Server IP target address (H Hugh Flint) 3. Re: Server IP target address (Bob Pyke) 4. Problems surrounding Dial with service asterisk stop and start along with restart (Loren Tedford) 5. Re: Problems surrounding Dial with service asterisk stop and start along with restart (Steve Zingman) ---------------------------------------------------------------------- Message: 1 Date: Tue, 30 Aug 2016 15:03:25 -0400 From: <petem001@gmail.com> To: "APP RPT" <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Fw: cop command 2 and 3 disable enable Message-ID: <FDFAAE59BBC9400A96C9F248BF16FCF8@PierreMartel> Content-Type: text/plain; charset="utf-8" Sent this on Sunday. No answer yet.. Is it that complex? From: Pierre Martel Sent: Sunday, August 28, 2016 7:13 AM To: APP RPT Subject: cop command 2 and 3 disable enable Hi I am working on a project to interface an allstar node on a multimode digital repeater based on the MMDVM This would woould create a multimode fm,dtsar,fusion and dmr repeater system. I know some people dont like that. but on a remote site where energy and antenna deployement difficult and for place where installing multiple repeater is price prohibitive, this is a nice solution. No mode is left aside. but only one can be used at once. So in order to make this work I need to know how the cop 2 and 3 command works. I want to use the event manager to send those 2 command when one input from my URI is switching state. this will be connected to the MMDVM and it will prevent the tx or false rx when the DVMDM is taking control of the repeater. WHat happen to any audio received by the network when in disable mode? IS it still present at the URI? Does the link that are present stay connected or they disconnect? I need this so that I can figure out if it is more effective to use a pair of small relay to cut the audio lines and ptt lines when the MMDVM is active or doing it by software. thanks Pierre VE2PF