http://docs.allstarlink.org/drupal/node/170 Sent via smoke signal (Verizon) On Oct 28, 2015 5:48 PM, Neil k8it <k8it@cac.net> wrote: I have been waiting a bit before I start playing with DIAL on a RPI2. I still have two questions 1. Does the RPI2 DIAL version solve the tx echo buffer issue that the current version of Asterisk RPI2 code has. The fix to this issue seems to be taking a long time. 2. Some users have reorted that a lot of modules have been disabled, such as the Echolink channel driver and others. 3. With the new Mini-DV4 dongle $125 and the amount of capability, has anybody wrote a channel driver to tie the Yaesu Fusion Wires-X network into DIAL. It appears that most of the documentation is out there, we just need someone to write the channel driver Thanks 73 Neil Sablatzky K8IT Allstar Node 41838 KITLINK Allstar Node 42087 KITLINK HUB IRLP Node exp0068 Echolink K8IT-L WIRES-X K8IT 11479 Room 21479 *From:* Steve N4IRS <szingman@msgstor.com> *Sent:* Tuesday, October 27, 2015 10:35 AM *To:* N7MTC . <n7mtc@outlook.com> ; app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Procedure for loading DIAL on a R-Pi2 or a PC Mac, The RPi2 install is pretty much download the image, burn it to SD card,. Once the Pi boots, you can login on the HDMI / USB console, or SSH into the board on port 222. The board is setup for DHCP so check your DHCP (router) server for address. If you want, you can login via the built in serial port at 115,200 System will walk you through setup. FAQ for DIAL is at: <http://docs.allstarlink.org/drupal/node/170> <http://docs.allstarlink.org/drupal/node/170>> 73, Steve N4IRS On 10/27/2015 10:20 AM, N7MTC . wrote: Is there a procedure for loading the "new" DIAL version of asterisk for Raspberry pi2? I am looking to connect either a Pi2 or an intel NUC to a Yaesu Dr-1x using the Arcom RC-210 and the Arcom ADR. I noticed DIAL has replaced ACID as the latest flavor of asterisk for both PC and PI2. I have not found any install write-ups or YouTubes showing a DIAL install. Regardless of which platform I will need to use an USB to Serial adapter to connect the ALLSTAR node to the repeater controller. It will be of the FTDI chipset either a trendnet Tu-s9 or a GearMo USB RS-232. /73 Mac, N7MTC Benjamin Franklin - "Those who surrender freedom for security will not have, nor do they deserve, either one." _______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6173 / Virus Database: 4455/10900 - Release Date: 10/27/15