If you are talking about connecting a fob/URI directly to a modulator input of a direct FM radio, then you can set up USBradio or maybe simpleusb, to set txprelim=yes then it will preemphasize and limit the audio. Not sure where your 12 KHz limitation is reference to but if you are looking to limit at 25 Khz(5KHz), then set TX audio with a 1K tone @ 3K deviation. If you intend to limit at 12.5 KHz(2.5KHz), then set deviation with a 1K tone with 1.5 KHz deviation. I have several radios I feed into direct mod with voice and tone. Jon VA3RQ On 5/31/2016 3:40 AM, Steve Wright wrote:
Gurus,
What are the limitations with audio-driving a 50MHz FM Transmit VCO directly?
Sorry that's a really open-ended question. I suppose it will vary per each chan_ driver as well, as well as the emphasis settings and so on.
So dealing with the issues of emphasis, compression, (audio)bandwidth limiting and so on - how much can be taken out of the radio and handled by the chan_ drivers, and how different are they each?
It was suggested elsewhere, that everything over 12KHz be not permitted anywhere near an FM modulator stage, but how much does that actually happen with the CM119 chipset?
I ask because on a transmit-only site, there hardly seems to be any point to having a "transceiver" there at all, when a clock generator, buffer, PA, and filtering, is a fairly simple unit.
Cheers, Steve
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.