You do not have to assign a dtmf. Example: CLI> rpt cmd 2535 cop 1 0 The above command is a warm boot. 2535 is my node number. Notice the trailing 0 is needed to satisfy the command interpreter but has no meaning. Asterisk has command line help. Type "rpt cmd" and press enter will show options. -- Tim :wq On Jan 24, 2011, at 9:02 PM, K&R Yoksh wrote:
Hello,
I'm wondering if there is a way to manually issue a COP command? I've tried to issue it from the CLI> prompt, but so far no luck..
I have been working on my DTMF commands, and after the below commands didn't work, I wanted to check the syntax.. Is it possible, or do I have to assign a DTMF in rpt.conf, restart Asterisk, and retry?
1234 = cop,61,PP4=1 ; Turn on pp4 Thanks. 73,
Kyle K0KN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users