Hi Steve and all; I have setup node 2424 with app_rpt acting as the controller (so direct interface between the fob and the rptr); a couple of observations / questions: 1. I can't seem to change the frequency (pitch) or speed of the CW ident. I have the following in the morse stanza in rpt.conf: [morse] speed=30 ; Approximate speed in WPM frequency=500 ; Morse Telemetry Frequency amplitude=4096 ; Morse Telemetry Amplitude ; idfrequency=500 idfrequency=500 ; Morse ID Frequency idamplitude=1024 ; Morse ID Amplitude Is this a known issue or am I missing something? 2. Courtesy tones: (a) When a remote link finishes transmitting, there is no courtesy tone. I believe the following line specifies the c'tone for the remote: remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000) Do we need to specify / enable the remotetx somewhere? (b) Is the time delay between the drop of a carrier and the beginning of the c'tone (when using the repeater in local mode) variable? - the delay seems to be quite long. 3. PL tone: In usbradio.conf I have the following: txtoctype=notone ; notone - encode CTCSS and stop sending tone before unkeying TX Is the time between the end of PL and drop of carrier variable (to avoid squelch crashes on non-commercial aka amateur radios!) Thanks! Ramesh.