That's and excellent idea. I have used this method before to set deviation before. One way you could do this easily without modifying the code of the app_rpt module would simply be to create an audio with this constant tone frequency and call it up with a macro command using the localplay function. On Wed, Jun 21, 2017 at 11:33 PM, Pierre Martel <petem001@gmail.com> wrote:
Hi I am trying to find what is the frequency of the tone sent when we use the command radio tune txvoice??
I am asking cause if it would be 1247 hz we could use the bessel null methode to adjust our tx to 3hz with just a simple rtl-sdr and sdr#
the theory behind this is a bit complcated but at a certain frequency and level the carrier is completly or almost completly off.
this can easily be seen on a spectrum analyzer. but our sdr# are like spectrum analyzer.
so if we would want a 3khz deviation we need to send a 1247 hz signal and adjust the levels till the main carrier disapear on the spectrum analyzer.
the maths are this 3000/2.405=1247
you can see the theory at use here:
https://www.youtube.com/watch?v=8IBOYoIV5m8
So if there is a way to decide the tone we want we could use that methode to adjust or repeater deviation ( for the voice part at least)
now if we wanted to adjust the deviation for the ctcss, this is another story. but could it be calculated by the voice level setting if sent on the same output?
thanks for listening to my crazy idea ;-)
By the way you can set a radio with a sound card attached to it a known level and use that as the signal to adjust the rxvoice level also. since we can set that with simple audio generating software available free online
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.