Re: [App_rpt-users] App_rpt-users Digest, Vol 57, Issue 82
Sent from iPad On Nov 27, 2013, at 2:06 PM, app_rpt-users-request@ohnosec.org wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re?: Re: dmk uri question (pete M) 2. connections fail (Benjamin L. Naber) 3. Re: Re?: Re: dmk uri question (Marshall Oldham) 4. Re: connections fail (Paul J. Agamata)
----------------------------------------------------------------------
Message: 1 Date: Wed, 27 Nov 2013 13:58:48 -0500 From: pete M <petem001@hotmail.com> Cc: <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Re?: Re: dmk uri question Message-ID: <BAY407-EAS7839FC649927EB0A1392FA97EF0@phx.gbl> Content-Type: text/plain; charset="utf-8"
Ok . Anyone can tell me how to find if the uri you have do have an eeprom inside aside from opening it..
--- Message initial ---
De : "Shane Morris" <edgecomberts@gmail.com> Envoy? : 27 novembre 2013 12:14 A : "Doug Crompton" <doug@crompton.com> Cc: "Greg" <kb1ncj@gmail.com>, app_rpt-users@ohnosec.org Objet : Re: [App_rpt-users] dmk uri question
Can't you store an ID string in the EEPROM for identifying multiple URIs on a system, so the computer knows which interface to activate when, which is useful for crossband repeaters and the like.
That was my impression of why it was there - I could be way off the mark though, and bow to superior knowledge in these matters.
On Thu, Nov 28, 2013 at 3:49 AM, Doug Crompton <doug@crompton.com> wrote:
The eeprom stores the level settings and is never necessary but might be desirable if you are using the interface with multiple radios. You would mount the eeprom in the connector of each radio cable and store the settings for that radio. Then when you switched cables the settings would follow along with it. If you are just using one radio you would not need the eeprom and even if you were using more than one radio being without it it would just mean you would have to run through the settings again when you changed radios. Without the eeprom level settings are stored in a configuration file on the computer when you run the level setting utility. For SimpleUSB the file is called 'simpleusb_tune_usb.conf'. and it looks like this -
[usb] ; name=usb ; devicenum=1 devstr=1-1 rxmixerset=500 txmixaset=500 txmixbset=500
The file is created by 'simpleusb-tune-menu' but you can edit it manually if you like.
Look at the DMK website under support files and there is a description of this. The eeprom is a common type so if you decide later you want to use it you can buy it from Mouser or elsewhere.
*73 DougWA3DSPhttp://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
Date: Wed, 27 Nov 2013 10:51:12 -0500 From: kb1ncj@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] dmk uri question
Looking to buy another uri. What is the advantage of the uri with eeprom? Also if anyone has an extra they are willing to part with, let me know.. Thanks _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
DMK Engineering website URI schematic says, " Note: Normally U1 (EEPROM) is not installed on PCB. If desired, connect EEPROM to radio connector J1. http://www.dmkeng.com/images/URIx%20Schematic.pdf Bob Sent from iPad
----------------------------------------------------------------------
Message: 1 Date: Wed, 27 Nov 2013 13:58:48 -0500 From: pete M <petem001@hotmail.com> Cc: <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Re?: Re: dmk uri question Message-ID: <BAY407-EAS7839FC649927EB0A1392FA97EF0@phx.gbl> Content-Type: text/plain; charset="utf-8"
Ok . Anyone can tell me how to find if the uri you have do have an eeprom inside aside from opening it..
--- Message initial ---
De : "Shane Morris" <edgecomberts@gmail.com> Envoy? : 27 novembre 2013 12:14 A : "Doug Crompton" <doug@crompton.com> Cc: "Greg" <kb1ncj@gmail.com>, app_rpt-users@ohnosec.org Objet : Re: [App_rpt-users] dmk uri question
Can't you store an ID string in the EEPROM for identifying multiple URIs on a system, so the computer knows which interface to activate when, which is useful for crossband repeaters and the like.
That was my impression of why it was there - I could be way off the mark though, and bow to superior knowledge in these matters.
On Thu, Nov 28, 2013 at 3:49 AM, Doug Crompton <doug@crompton.com> wrote:
The eeprom stores the level settings and is never necessary but might be desirable if you are using the interface with multiple radios. You would mount the eeprom in the connector of each radio cable and store the settings for that radio. Then when you switched cables the settings would follow along with it. If you are just using one radio you would not need the eeprom and even if you were using more than one radio being without it it would just mean you would have to run through the settings again when you changed radios. Without the eeprom level settings are stored in a configuration file on the computer when you run the level setting utility. For SimpleUSB the file is called 'simpleusb_tune_usb.conf'. and it looks like this -
[usb] ; name=usb ; devicenum=1 devstr=1-1 rxmixerset=500 txmixaset=500 txmixbset=500
The file is created by 'simpleusb-tune-menu' but you can edit it manually if you like.
Look at the DMK website under support files and there is a description of this. The eeprom is a common type so if you decide later you want to use it you can buy it from Mouser or elsewhere.
*73 DougWA3DSPhttp://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
Date: Wed, 27 Nov 2013 10:51:12 -0500 From: kb1ncj@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] dmk uri question
Looking to buy another uri. What is the advantage of the uri with eeprom? Also if anyone has an extra they are willing to part with, let me know.. Thanks _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (1)
-
kk6ecm