ASL debian install script (not iso)
So after my success loading ASL/stretch iso on vps, I want to use one other server where I can't load a iso on vps. But I was looking for the scripts to install on a existing debian 9 install. Can anyone point me to the right direction for those ? Just experimenting... Thanks, ...mike/kb8jnm
https://wiki.allstarlink.org/wiki/ASL_FAQ See question 4. On 05/17/2018 10:09 PM, Mike wrote:
So after my success loading ASL/stretch iso on vps,
I want to use one other server where I can't load a iso on vps.
But I was looking for the scripts to install on a existing debian 9 install.
Can anyone point me to the right direction for those ?
Just experimenting...
Thanks,
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The instructions Steve linked to on the FAQ worked flawlessly for me on Linode. Mike K6MJU On Thu, May 17, 2018 at 7:10 PM Steve Zingman <szingman@msgstor.com> wrote:
https://wiki.allstarlink.org/wiki/ASL_FAQ See question 4.
On 05/17/2018 10:09 PM, Mike wrote:
So after my success loading ASL/stretch iso on vps,
I want to use one other server where I can't load a iso on vps.
But I was looking for the scripts to install on a existing debian 9 install.
Can anyone point me to the right direction for those ?
Just experimenting...
Thanks,
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Well, I did ask for it... LOL You never learn anything if everything goes well... Plenty of issues for me but I did retrace the steps to see where it was going wrong. Have to hit it some other time as I'm still learning the querky diffs on debian over centos so it takes me a bit to break down the scripts. But I think I may start anew just to see if it wasn't a fluke. But basically, the dahdi mods didn't install and probably could not be built from other stuff that did not load. But I can't see it in error logs. So, I will try fresh, again, fri ? ...mike/kb8jnm On 5/18/2018 12:09 AM, Mike Lee wrote:
The instructions Steve linked to on the FAQ worked flawlessly for me on Linode.
Mike K6MJU
On Thu, May 17, 2018 at 7:10 PM Steve Zingman <szingman@msgstor.com> wrote:
https://wiki.allstarlink.org/wiki/ASL_FAQ See question 4. On 05/17/2018 10:09 PM, Mike wrote:
So after my success loading ASL/stretch iso on vps,
I want to use one other server where I can't load a iso on vps.
But I was looking for the scripts to install on a existing debian 9 install.
Can anyone point me to the right direction for those ?
Just experimenting...
Thanks,
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
If I'm not mistaken, I thought dahdi had to be compiled into the kernel. On Thu, May 17, 2018 at 11:58 PM, Mike <mm@midnighteng.com> wrote:
Well,
I did ask for it... LOL
You never learn anything if everything goes well...
Plenty of issues for me but I did retrace the steps to see where it was going wrong.
Have to hit it some other time as I'm still learning the querky diffs on debian over centos
so it takes me a bit to break down the scripts. But I think I may start anew just to see if it wasn't a fluke.
But basically, the dahdi mods didn't install and probably could not be built from other stuff that did not load.
But I can't see it in error logs. So, I will try fresh, again, fri ?
...mike/kb8jnm
On 5/18/2018 12:09 AM, Mike Lee wrote:
The instructions Steve linked to on the FAQ worked flawlessly for me on Linode.
Mike K6MJU
On Thu, May 17, 2018 at 7:10 PM Steve Zingman <szingman@msgstor.com> wrote:
https://wiki.allstarlink.org/wiki/ASL_FAQ See question 4. On 05/17/2018 10:09 PM, Mike wrote:
So after my success loading ASL/stretch iso on vps,
I want to use one other server where I can't load a iso on vps.
But I was looking for the scripts to install on a existing debian 9 install.
Can anyone point me to the right direction for those ?
Just experimenting...
Thanks,
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Operating your AM rig without a scope is like driving our car at night without headlights. (~K4KYV) 73 = Best Regards, -Geoff/W5OMR
Yes, I seem to miss thins deploying this way. So, After looking into it a bit more, the debian 9 I started with, "was a minimal install" and the host I was using did not have the full flavor OS nor did they allow for the iso so, I'm back to vultr for the next install. I was only doing it for testing purposes and perhaps write a easy how-to. But I don't want to put that much time in it... LOL... I am writing a quicky for the ISO install at vultr. (the iso stays with your account so you can do multiple deployments from the same). And you can destroy the server and start anew anytime you want. As well as snap a image of it's current drive. I'll send a link soon. ...mike/kb8jnm On 5/18/2018 7:24 AM, ARS W5OMR wrote:
If I'm not mistaken, I thought dahdi had to be compiled into the kernel.
On Thu, May 17, 2018 at 11:58 PM, Mike <mm@midnighteng.com> wrote:
Well,
I did ask for it... LOL
You never learn anything if everything goes well...
Plenty of issues for me but I did retrace the steps to see where it was going wrong.
Have to hit it some other time as I'm still learning the querky diffs on debian over centos
so it takes me a bit to break down the scripts. But I think I may start anew just to see if it wasn't a fluke.
But basically, the dahdi mods didn't install and probably could not be built from other stuff that did not load.
But I can't see it in error logs. So, I will try fresh, again, fri ?
...mike/kb8jnm
On 5/18/2018 12:09 AM, Mike Lee wrote:
The instructions Steve linked to on the FAQ worked flawlessly for me on Linode.
Mike K6MJU
On Thu, May 17, 2018 at 7:10 PM Steve Zingman <szingman@msgstor.com> wrote:
https://wiki.allstarlink.org/wiki/ASL_FAQ See question 4. On 05/17/2018 10:09 PM, Mike wrote:
So after my success loading ASL/stretch iso on vps,
I want to use one other server where I can't load a iso on vps.
But I was looking for the scripts to install on a existing debian 9 install.
Can anyone point me to the right direction for those ?
Just experimenting...
Thanks,
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Actually, DAHDI is compiled using the kernel headers. Not actually part of the kernel but a loadable module. Steve N4IRS On 5/18/2018 7:24 AM, ARS W5OMR wrote:
If I'm not mistaken, I thought dahdi had to be compiled into the kernel.
On Thu, May 17, 2018 at 11:58 PM, Mike <mm@midnighteng.com> wrote:
Well,
I did ask for it... LOL
You never learn anything if everything goes well...
Plenty of issues for me but I did retrace the steps to see where it was going wrong.
Have to hit it some other time as I'm still learning the querky diffs on debian over centos
so it takes me a bit to break down the scripts. But I think I may start anew just to see if it wasn't a fluke.
But basically, the dahdi mods didn't install and probably could not be built from other stuff that did not load.
But I can't see it in error logs. So, I will try fresh, again, fri ?
...mike/kb8jnm
On 5/18/2018 12:09 AM, Mike Lee wrote:
The instructions Steve linked to on the FAQ worked flawlessly for me on Linode.
Mike K6MJU
On Thu, May 17, 2018 at 7:10 PM Steve Zingman <szingman@msgstor.com> wrote:
https://wiki.allstarlink.org/wiki/ASL_FAQ See question 4. On 05/17/2018 10:09 PM, Mike wrote:
So after my success loading ASL/stretch iso on vps,
I want to use one other server where I can't load a iso on vps.
But I was looking for the scripts to install on a existing debian 9 install.
Can anyone point me to the right direction for those ?
Just experimenting...
Thanks,
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Well, while not investigating it further at this time, I was not sure how minimal the minimal Deb9 install that was at A2-hosting, so, Without the Full Flavor offering.... I did not know what I was missing, that might have been expected in the scripting. Since I'm not a debian guy, at this point, I'll leave that to others for now. I may come back to it later. I am fairly certain that the minimal install was missing something needed. ...mike/kb8jnm On 5/18/2018 11:47 AM, Steve Zingman wrote:
Actually, DAHDI is compiled using the kernel headers. Not actually part of the kernel but a loadable module.
Steve N4IRS
On 5/18/2018 7:24 AM, ARS W5OMR wrote:
If I'm not mistaken, I thought dahdi had to be compiled into the kernel.
On Thu, May 17, 2018 at 11:58 PM, Mike <mm@midnighteng.com> wrote:
Well,
I did ask for it... LOL
You never learn anything if everything goes well...
Plenty of issues for me but I did retrace the steps to see where it was going wrong.
Have to hit it some other time as I'm still learning the querky diffs on debian over centos
so it takes me a bit to break down the scripts. But I think I may start anew just to see if it wasn't a fluke.
But basically, the dahdi mods didn't install and probably could not be built from other stuff that did not load.
But I can't see it in error logs. So, I will try fresh, again, fri ?
...mike/kb8jnm
On 5/18/2018 12:09 AM, Mike Lee wrote:
The instructions Steve linked to on the FAQ worked flawlessly for me on Linode.
Mike K6MJU
On Thu, May 17, 2018 at 7:10 PM Steve Zingman <szingman@msgstor.com> wrote:
https://wiki.allstarlink.org/wiki/ASL_FAQ See question 4. On 05/17/2018 10:09 PM, Mike wrote:
So after my success loading ASL/stretch iso on vps,
I want to use one other server where I can't load a iso on vps.
But I was looking for the scripts to install on a existing debian 9 install.
Can anyone point me to the right direction for those ?
Just experimenting...
Thanks,
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Even if it was missing something, the deb packages SHOULD install everything that is needed. If it did not, I need to fix it. I can when I get a chance to run a install on vultr.com and see if I missed something. On 5/18/2018 1:36 PM, Mike wrote:
Well, while not investigating it further at this time,
I was not sure how minimal the minimal Deb9 install that was at A2-hosting, so,
Without the Full Flavor offering....
I did not know what I was missing, that might have been expected in the scripting.
Since I'm not a debian guy, at this point, I'll leave that to others for now.
I may come back to it later. I am fairly certain that the minimal install was missing something needed.
...mike/kb8jnm
On 5/18/2018 11:47 AM, Steve Zingman wrote:
Actually, DAHDI is compiled using the kernel headers. Not actually part of the kernel but a loadable module.
Steve N4IRS
On 5/18/2018 7:24 AM, ARS W5OMR wrote:
If I'm not mistaken, I thought dahdi had to be compiled into the kernel.
On Thu, May 17, 2018 at 11:58 PM, Mike <mm@midnighteng.com> wrote:
Well,
I did ask for it... LOL
You never learn anything if everything goes well...
Plenty of issues for me but I did retrace the steps to see where it was going wrong.
Have to hit it some other time as I'm still learning the querky diffs on debian over centos
so it takes me a bit to break down the scripts. But I think I may start anew just to see if it wasn't a fluke.
But basically, the dahdi mods didn't install and probably could not be built from other stuff that did not load.
But I can't see it in error logs. So, I will try fresh, again, fri ?
...mike/kb8jnm
On 5/18/2018 12:09 AM, Mike Lee wrote:
The instructions Steve linked to on the FAQ worked flawlessly for me on Linode.
Mike K6MJU
On Thu, May 17, 2018 at 7:10 PM Steve Zingman <szingman@msgstor.com> wrote:
https://wiki.allstarlink.org/wiki/ASL_FAQ See question 4. On 05/17/2018 10:09 PM, Mike wrote:
So after my success loading ASL/stretch iso on vps,
I want to use one other server where I can't load a iso on vps.
But I was looking for the scripts to install on a existing debian 9 install.
Can anyone point me to the right direction for those ?
Just experimenting...
Thanks,
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
ARS W5OMR -
Mike -
Mike Lee -
Steve Zingman