in /etc/asterisk/modules.conf did you have load => chan_usbradio.so ; noload => chan_simpleusb.so; then make sure usbradio.conf is in /etc/asterisk, properly setup for your configuration? Thanks, Bob kk6ecm 73 Sent from iPad

On Mar 16, 2016, at 12:08 AM, David Osborn <david.osborn@manx.net> wrote:

Hello all,

I've finally got around to setting-up a Dial installation on an RPi2 and hit a snag:

The image boots as it should and I end up with Asterisk running and the LED flashing on the USB dongle (which has been used without difficulty on a PC-based installation for some time).

Here's the first problem:

root@peel:/etc/asterisk# /usr/sbin/radio-tune-menu Error parsing device parameters root@peel:/etc/asterisk#

The second thing is that I'd like to use full-fat ChanUSB, using DSP for everything. I set "rxchannel = Radio/usb" in rpt.conf, but Asterisk takes great exception to that complaining that it can't find the channel driver.

So, what would upset radio-tune-menu and how to use ChanUSB?

As always, I'll be missing something obvious. Thanks.

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.