Finally found what was realy happening.. I was running two instance of the same node number (40660). The first one located on the Dominican Republic and the second one on Puerto Rico. Two different ISPs and IP address. I shutdown down the node located on Dominican Republic and the other node in Puerto Rico started to connect without any problem. 73' Alberto KP4AP ________________________________ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of app_rpt-users-request@lists.allstarlink.org <app_rpt-users-request@lists.allstarlink.org> Sent: Sunday, May 13, 2018 12:00 PM To: app_rpt-users@lists.allstarlink.org Subject: App_rpt-users Digest, Vol 111, Issue 9 Send App_rpt-users mailing list submissions to app_rpt-users@lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner@lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Re: Failed Connections (k7ilo1@gmail.com) 2. Voice ID Audio Nodes List (Mike) 3. Re: Failed Connections (Mike) 4. Re: Voice ID Audio Nodes List (Bryan Fields) 5. Re: Failed Connections (k7ilo1@gmail.com) 6. Re: Voice ID Audio Nodes List (Mike) 7. Re: Failed Connections (k7ilo1@gmail.com) 8. New ASL v 1.0.1 not connecting to any HUB or Node (Alberto Enrique Puig) 9. Re: New ASL v 1.0.1 not connecting to any HUB or Node (Tim Sawyer) ---------------------------------------------------------------------- Message: 1 Date: Sat, 12 May 2018 09:45:58 -0700 From: <k7ilo1@gmail.com> To: "'Users of Asterisk app_rpt'" <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Failed Connections Message-ID: <004201d3ea10$b4b5dc70$1e219550$@gmail.com> Content-Type: text/plain; charset="utf-8" Sorry gang for not getting back sooner but what I did find is that I could not ping anything except for local ip address’s with my router as the dns server So I changed it to Google’s quad 8’s and I was able to ping things on the internet but was still not able to connect to anything. But today, I decided just to check because sometimes it takes time for dns records to populate and low-and-behold, I was able to connect to nodes now. What was funny is, after the online nodes portal was re-instated, I was showing in the online nodes list but couldn’t go anywhere. Oh well, its working now. Thanks all Harold K7ILO Node: 27863 From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, May 7, 2018 10:05 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Failed Connections Giving this some more thought... (what was I thinking... or not) I guess I skipped over the fact you may not have a internet connection at all. Probably the first check anyway. Try something from a command line first to check it. Reboot router/computer and check again / check dns at node. ...mike/kb8jnm On 5/7/2018 11:27 AM, Mike wrote: start with the DTMF. listen to the readback of the failed connect. or Watch the console output but before you make any changes to the system, reboot it. If nothing has changed with your config than adjusting something is the wrong solution. The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring. But other possibilities exist. ...mike/kb8jnm On 5/6/2018 3:06 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but…. I have a question to probably a common problem and easy fix. I am using the Dial distro of allstar which has been working great up to some point. So today I decided to fire up the old HT and dial up a node for some traffic to listen to. Connection failed is what I’m getting. No matter what node I try to dial up I get, Connection failed. All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router. Where might I start to find and resolve my issue. Thanks gang Harold K7ILO Node 27863 _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.