Probably dated but in the words of the General on the original movie Wargames.... "I would pxxs on a spark plug if I thought it would help. " " computers only do what they are instructed to do. We just need to figure out what it was we said. " On May 21, 2016 18:59, <app_rpt-users-request@ohnosec.org> wrote: Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org You can reach the person managing the list at app_rpt-users-owner@ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee (David McGough) 2. Re: . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee (Steve Agee) 3. Re: Voter RTCM sometimes offline-mode but not when there is a telnet connection (Chuck Henderson) 4. Re: . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee (David McGough) 5. Re: . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee (Steve Agee) ---------------------------------------------------------------------- Message: 1 Date: Sat, 21 May 2016 18:13:00 -0400 (EDT) From: David McGough <kb4fxc@inttek.net> To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee Message-ID: <Pine.LNX.4.44.1605211807150.17143-100000@goliath.inttek.net> Content-Type: TEXT/PLAIN; charset=US-ASCII For any of the AllStar releases: Launch Asterisk from the command prompt. asterisk> radio active usb asterisk> radio tune save If two URI's are attached, perform: asterisk> radio active usb1 asterisk> radio tune save If three URI's are attached, perform: asterisk> radio active usb2 asterisk> radio tune save ...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with what the AllStar software interprets the various devstr parameters to be. asterisk> exit On Sat, 21 May 2016, Steve Agee wrote:

Thanks, but as previously mentioned, this is DIAL and so your CLI commands from XIPAR do not exist.

N5ZUA

------------------------------ Message: 2 Date: Sat, 21 May 2016 17:15:13 -0500 From: Steve Agee <n5zua@earthlink.net> To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee Message-ID: <806c3361-90f7-64cb-9533-173f12638871@earthlink.net> Content-Type: text/plain; charset="windows-1252"; Format="flowed" Yes, and this works if everything is USBRADIO. But remember, one is USBRADIO and one is SIMPLEUSB. Ah, now the fun begins. N5ZUA On 5/21/2016 5:13 PM, David McGough wrote:

For any of the AllStar releases:

Launch Asterisk from the command prompt.

asterisk> radio active usb asterisk> radio tune save

If two URI's are attached, perform:

asterisk> radio active usb1 asterisk> radio tune save

If three URI's are attached, perform:

asterisk> radio active usb2 asterisk> radio tune save

...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with what the AllStar software interprets the various devstr parameters to be.

asterisk> exit

On Sat, 21 May 2016, Steve Agee wrote:

...

Thanks, but as previously mentioned, this is DIAL and so your CLI commands from XIPAR do not exist.

N5ZUA

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.