. usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee
If you are using Xipar then under the CLI use: radio probe on It will scan all currently connected Fobs and indicate bus and device number. radio probe off will stop the scan. Edit the urd.conf file to set device parameters accordingly. Restart Asterisk On May 21, 2016 17:08, <app_rpt-users-request@ohnosec.org> wrote: Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org You can reach the person managing the list at app_rpt-users-owner@ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee) 2. Voter RTCM sometimes offline-mode but not when there is a telnet connection (info@rainerbertsch.de) 3. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (kk6ecm) 4. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee) ---------------------------------------------------------------------- Message: 1 Date: Sat, 21 May 2016 14:04:56 -0500 From: Steve Agee <n5zua@earthlink.net> To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf = .confusion Message-ID: <c5dc4bf0-2c2c-3566-f32e-31a311653463@earthlink.net> Content-Type: text/plain; charset="windows-1252"; Format="flowed" Hello list: I've searched <http://www.xelatec.com/xipar/node/180> and I fully understand the description/explanations given. What I don't understand, with specific attention to the lines: |; name=usb ; ; devnum=1 ; devstr=4-2 ; is how to manually uncomment, and manipulate them. In this particular instance, I'm trying to get a DIAL box running with one original URI (early version) using the USBRADIO channel driver, and one URIX (newer version) using the SIMPLEUSB channel driver. I've followed the step-by-step (or was that Crossbar 5 Duude?) instructions for starting off with a single node, then adding the second node. That simply doesn't work. The second URIx green L.E.D. stays solid throughout the process. Are these lines provided for informational purposes only, or can they be edited to force the second device to be recognized and assigned? N5ZUA |
Excuse my mistake. Edit the urd_tune_usb.conf not urd.conf On May 21, 2016 17:08, <app_rpt-users-request@ohnosec.org> wrote:
If you are using Xipar then under the CLI use:
radio probe on
It will scan all currently connected Fobs and indicate bus and device number.
radio probe off
will stop the scan.
Edit the urd.conf file to set device parameters accordingly.
Restart Asterisk On May 21, 2016 17:08, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee) 2. Voter RTCM sometimes offline-mode but not when there is a telnet connection (info@rainerbertsch.de) 3. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (kk6ecm) 4. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee)
----------------------------------------------------------------------
Message: 1 Date: Sat, 21 May 2016 14:04:56 -0500 From: Steve Agee <n5zua@earthlink.net> To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf = .confusion Message-ID: <c5dc4bf0-2c2c-3566-f32e-31a311653463@earthlink.net> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
Hello list:
I've searched
<http://www.xelatec.com/xipar/node/180>
and I fully understand the description/explanations given. What I don't understand, with specific attention to the lines:
|; name=usb ; ; devnum=1 ; devstr=4-2 ;
is how to manually uncomment, and manipulate them. In this particular instance, I'm trying to get a DIAL box running with one original URI (early version) using the USBRADIO channel driver, and one URIX (newer version) using the SIMPLEUSB channel driver. I've followed the step-by-step (or was that Crossbar 5 Duude?) instructions for starting off with a single node, then adding the second node. That simply doesn't work. The second URIx green L.E.D. stays solid throughout the process. Are these lines provided for informational purposes only, or can they be edited to force the second device to be recognized and assigned?
N5ZUA
|
Thanks, but as previously mentioned, this is DIAL and so your CLI commands from XIPAR do not exist. N5ZUA On 5/21/2016 4:36 PM, KM4NRJ FLORIDA wrote:
Excuse my mistake.
Edit the urd_tune_usb.conf not urd.conf
On May 21, 2016 17:08, <app_rpt-users-request@ohnosec.org <mailto:app_rpt-users-request@ohnosec.org>> wrote:
If you are using Xipar then under the CLI use:
radio probe on
It will scan all currently connected Fobs and indicate bus and device number.
radio probe off
will stop the scan.
Edit the urd.conf file to set device parameters accordingly.
Restart Asterisk
On May 21, 2016 17:08, <app_rpt-users-request@ohnosec.org <mailto:app_rpt-users-request@ohnosec.org>> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org>
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org <mailto:app_rpt-users-request@ohnosec.org>
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org <mailto:app_rpt-users-owner@ohnosec.org>
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee) 2. Voter RTCM sometimes offline-mode but not when there is a telnet connection (info@rainerbertsch.de <mailto:info@rainerbertsch.de>) 3. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (kk6ecm) 4. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee)
----------------------------------------------------------------------
Message: 1 Date: Sat, 21 May 2016 14:04:56 -0500 From: Steve Agee <n5zua@earthlink.net <mailto:n5zua@earthlink.net>> To: app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Subject: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf = .confusion Message-ID: <c5dc4bf0-2c2c-3566-f32e-31a311653463@earthlink.net <mailto:c5dc4bf0-2c2c-3566-f32e-31a311653463@earthlink.net>> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
Hello list:
I've searched
<http://www.xelatec.com/xipar/node/180>
and I fully understand the description/explanations given. What I don't understand, with specific attention to the lines:
|; name=usb ; ; devnum=1 ; devstr=4-2 ;
is how to manually uncomment, and manipulate them. In this particular instance, I'm trying to get a DIAL box running with one original URI (early version) using the USBRADIO channel driver, and one URIX (newer version) using the SIMPLEUSB channel driver. I've followed the step-by-step (or was that Crossbar 5 Duude?) instructions for starting off with a single node, then adding the second node. That simply doesn't work. The second URIx green L.E.D. stays solid throughout the process. Are these lines provided for informational purposes only, or can they be edited to force the second device to be recognized and assigned?
N5ZUA
|
For any of the AllStar releases: Launch Asterisk from the command prompt. asterisk> radio active usb asterisk> radio tune save If two URI's are attached, perform: asterisk> radio active usb1 asterisk> radio tune save If three URI's are attached, perform: asterisk> radio active usb2 asterisk> radio tune save ...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with what the AllStar software interprets the various devstr parameters to be. asterisk> exit On Sat, 21 May 2016, Steve Agee wrote:
Thanks, but as previously mentioned, this is DIAL and so your CLI commands from XIPAR do not exist.
N5ZUA
Yes, and this works if everything is USBRADIO. But remember, one is USBRADIO and one is SIMPLEUSB. Ah, now the fun begins. N5ZUA On 5/21/2016 5:13 PM, David McGough wrote:
For any of the AllStar releases:
Launch Asterisk from the command prompt.
asterisk> radio active usb asterisk> radio tune save
If two URI's are attached, perform:
asterisk> radio active usb1 asterisk> radio tune save
If three URI's are attached, perform:
asterisk> radio active usb2 asterisk> radio tune save
...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with what the AllStar software interprets the various devstr parameters to be.
asterisk> exit
On Sat, 21 May 2016, Steve Agee wrote:
Thanks, but as previously mentioned, this is DIAL and so your CLI commands from XIPAR do not exist.
N5ZUA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
For simpleusb, replace the word "radio" with "susb" ...Like: asterisk> susb active usb asterisk> susb tune save And, the written config files will be like: simpleusb_tune_xxxx.conf On Sat, 21 May 2016, Steve Agee wrote:
Yes, and this works if everything is USBRADIO. But remember, one is USBRADIO and one is SIMPLEUSB. Ah, now the fun begins.
N5ZUA
On 5/21/2016 5:13 PM, David McGough wrote:
For any of the AllStar releases:
Launch Asterisk from the command prompt.
asterisk> radio active usb asterisk> radio tune save
If two URI's are attached, perform:
asterisk> radio active usb1 asterisk> radio tune save
If three URI's are attached, perform:
asterisk> radio active usb2 asterisk> radio tune save
...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with what the AllStar software interprets the various devstr parameters to be.
asterisk> exit
Yes, and already "been there, done that" but the light on the second URIx stays solid. N5ZUA On 5/21/2016 5:28 PM, David McGough wrote:
For simpleusb, replace the word "radio" with "susb" ...Like:
asterisk> susb active usb asterisk> susb tune save
And, the written config files will be like: simpleusb_tune_xxxx.conf
On Sat, 21 May 2016, Steve Agee wrote:
Yes, and this works if everything is USBRADIO. But remember, one is USBRADIO and one is SIMPLEUSB. Ah, now the fun begins.
N5ZUA
On 5/21/2016 5:13 PM, David McGough wrote:
For any of the AllStar releases:
Launch Asterisk from the command prompt.
asterisk> radio active usb asterisk> radio tune save
If two URI's are attached, perform:
asterisk> radio active usb1 asterisk> radio tune save
If three URI's are attached, perform:
asterisk> radio active usb2 asterisk> radio tune save
...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with what the AllStar software interprets the various devstr parameters to be.
asterisk> exit
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Steve, Both usbradio and simpleusb are simultaneously competing for the available URI's...So, you have to train both drivers as to which URI to use. The procedure is straight-forward. This is an example for a 2 node system: 1) Fully setup the usbradio.conf and simpleusb.conf config files, each with [usb] and [usb1] stanzas. 2) Modify the rpt.conf file to use usbradio for both nodes. Stanzas like: rpt.conf: [1998] rxchannel=Radio/usb (lots of other config) [1999] rxchannel=Radio/usb1 (lots of other config) 3) Start Asterisk with "asterisk -vvvvgc" and save the usbradio_tune_xxxx.conf files: *CLI> radio active usb Active (command) USB Radio device set to [usb] *CLI> radio tune save Saved radio tuning settings to usbradio_tune_usb.conf *CLI> radio active usb1 Active (command) USB Radio device set to [usb1] *CLI> radio tune save Saved radio tuning settings to usbradio_tune_usb1.conf *CLI> stop now 4) Modify the rpt.conf setup for simpleusb: rpt.conf (test nodes 1998, 1999): [1998] rxchannel=SimpleUSB/usb (lots of other config) [1999] rxchannel=SimpleUSB/usb1 (lots of other config) 5) Start Asterisk with "asterisk -vvvvgc" and save the simpleusb_tune_xxxx.conf files: *CLI> *CLI> susb active usb *CLI> susb tune save Saved radio tuning settings to simpleusb_tune_usb.conf *CLI> susb active usb1 *CLI> susb tune save Saved radio tuning settings to simpleusb_tune_usb1.conf *CLI> stop now 6) FINALLY--You're ready! ...Change the rpt.conf to a mix/match of usbradio and/or simpleusb: rpt.conf (test nodes 1998, 1999): [1998] rxchannel=SimpleUSB/usb ;rxchannel=Radio/usb (lots of other config) (lots of other config) [1999] ;rxchannel=SimpleUSB/usb1 rxchannel=Radio/usb1 (lots of other config) 7) Start Asterisk and do further setup. 73, David KB4FXC On Sat, 21 May 2016, Steve Agee wrote:
Yes, and already "been there, done that" but the light on the second URIx stays solid.
N5ZUA
That did the trick! Thanks, David! Once I read the logic behind your argument, it made perfect sense, and the process went just as you described. N5ZUA On 5/21/2016 6:46 PM, David McGough wrote:
Steve,
Both usbradio and simpleusb are simultaneously competing for the available URI's...So, you have to train both drivers as to which URI to use.
The procedure is straight-forward. This is an example for a 2 node system:
1) Fully setup the usbradio.conf and simpleusb.conf config files, each with [usb] and [usb1] stanzas.
2) Modify the rpt.conf file to use usbradio for both nodes. Stanzas like:
rpt.conf:
[1998] rxchannel=Radio/usb (lots of other config)
[1999] rxchannel=Radio/usb1 (lots of other config)
3) Start Asterisk with "asterisk -vvvvgc" and save the usbradio_tune_xxxx.conf files:
*CLI> radio active usb Active (command) USB Radio device set to [usb] *CLI> radio tune save Saved radio tuning settings to usbradio_tune_usb.conf *CLI> radio active usb1 Active (command) USB Radio device set to [usb1] *CLI> radio tune save Saved radio tuning settings to usbradio_tune_usb1.conf *CLI> stop now
4) Modify the rpt.conf setup for simpleusb:
rpt.conf (test nodes 1998, 1999):
[1998] rxchannel=SimpleUSB/usb (lots of other config)
[1999] rxchannel=SimpleUSB/usb1 (lots of other config)
5) Start Asterisk with "asterisk -vvvvgc" and save the simpleusb_tune_xxxx.conf files:
*CLI> *CLI> susb active usb *CLI> susb tune save Saved radio tuning settings to simpleusb_tune_usb.conf *CLI> susb active usb1 *CLI> susb tune save Saved radio tuning settings to simpleusb_tune_usb1.conf *CLI> stop now
6) FINALLY--You're ready! ...Change the rpt.conf to a mix/match of usbradio and/or simpleusb:
rpt.conf (test nodes 1998, 1999):
[1998] rxchannel=SimpleUSB/usb ;rxchannel=Radio/usb (lots of other config)
(lots of other config)
[1999] ;rxchannel=SimpleUSB/usb1 rxchannel=Radio/usb1 (lots of other config)
7) Start Asterisk and do further setup.
73, David KB4FXC
On Sat, 21 May 2016, Steve Agee wrote:
Yes, and already "been there, done that" but the light on the second URIx stays solid.
N5ZUA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
David McGough -
KM4NRJ FLORIDA -
Steve Agee