I just connected my repeater a Motorola GM500R With a Maxtrac M10 receiver and M120 TX. The jumper on the board is set to B on the RX. When I try to connect to a node I get a node # Connection Failed. Not sure as to what to do , I am not a current Linux fan nor as good with the command line interface as I used to be 20yrs ago working on Linux servers for EDS and AT&T. I made a change on the web portal and then selected download, I saw the following come up on my local node system: Connected to Asterisk 1526 currently running on AllStar (pid = 684) [Jan 23 19:18:34] NOTICE[697]: cryptostub.c:42 stub_ast_key_get: Crypto support not loaded! [Jan 23 19:18:34] WARNING[697]: chan_iax2.c:6750 authenticate_verify: requested inkey 'allstar' for RSA authentication does not exist [Jan 23 19:18:34] NOTICE[697]: chan_iax2.c:9459 socket_process: Host 67.215.233.178 failed to authenticate as allstar-sys Any suggestions or direction on the above two issues would be appreciated. Thank you, Greg W2GCM
It sounds like your system is not loging into the allstar network. It could be the user/pass in iax.conf is bad or missing register=29261:123456@register.allstarlink.org Check that against your setup in the web portal. (don't remember how to retrieve it but it's in there) But has nothing to do with your hardware. And I doubt a Linux issue, it is a asterisk/app_rpt issue. Well, it's a place to look for a start. ...mike/kb8jnm
I just connected my repeater a Motorola GM500R With a Maxtrac M10 receiver and M120 TX. The jumper on the board is set to B on the RX. When I try to connect to a node I get a node # Connection Failed. Not sure as to what to do , I am not a current Linux fan nor as good with the command line interface as I used to be 20yrs ago working on Linux servers for EDS and AT&T. I made a change on the web portal and then selected download, I saw the following come up on my local node system:
Connected to Asterisk 1526 currently running on AllStar (pid = 684) [Jan 23 19:18:34] NOTICE[697]: cryptostub.c:42 stub_ast_key_get: Crypto support not loaded! [Jan 23 19:18:34] WARNING[697]: chan_iax2.c:6750 authenticate_verify: requested inkey 'allstar' for RSA authentication does not exist [Jan 23 19:18:34] NOTICE[697]: chan_iax2.c:9459 socket_process: Host 67.215.233.178 failed to authenticate as allstar-sys
Any suggestions or direction on the above two issues would be appreciated.
Thank you,
Greg W2GCM
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Make sure the allstar.pub file is located in /var/lib/asterisk/keys. Without it, the system won't authenticate to the portal or make any connections to other nodes. It also looks like you are missing something as well. On 01/23/2016 04:25 PM, Greg Mohr wrote:
I just connected my repeater a Motorola GM500R With a Maxtrac M10 receiver and M120 TX. The jumper on the board is set to B on the RX. When I try to connect to a node I get a node # Connection Failed. Not sure as to what to do , I am not a current Linux fan nor as good with the command line interface as I used to be 20yrs ago working on Linux servers for EDS and AT&T. I made a change on the web portal and then selected download, I saw the following come up on my local node system:
Connected to Asterisk 1526 currently running on AllStar (pid = 684)
[Jan 23 19:18:34] NOTICE[697]: cryptostub.c:42 stub_ast_key_get: Crypto support not loaded!
[Jan 23 19:18:34] WARNING[697]: chan_iax2.c:6750 authenticate_verify: requested inkey 'allstar' for RSA authentication does not exist
[Jan 23 19:18:34] NOTICE[697]: chan_iax2.c:9459 socket_process: Host 67.215.233.178 failed to authenticate as allstar-sys
Any suggestions or direction on the above two issues would be appreciated.
Thank you,
Greg
W2GCM
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Greg Mohr -
mike＠midnighteng.com -
Stacy