Make sure the allstar.pub file is located in /var/lib/asterisk/keys. Without it, the system won't authenticate to the portal or make any connections to other nodes. It also looks like you are missing something as well. On 01/23/2016 04:25 PM, Greg Mohr wrote:
I just connected my repeater a Motorola GM500R With a Maxtrac M10 receiver and M120 TX. The jumper on the board is set to B on the RX. When I try to connect to a node I get a node # Connection Failed. Not sure as to what to do , I am not a current Linux fan nor as good with the command line interface as I used to be 20yrs ago working on Linux servers for EDS and AT&T. I made a change on the web portal and then selected download, I saw the following come up on my local node system:
Connected to Asterisk 1526 currently running on AllStar (pid = 684)
[Jan 23 19:18:34] NOTICE[697]: cryptostub.c:42 stub_ast_key_get: Crypto support not loaded!
[Jan 23 19:18:34] WARNING[697]: chan_iax2.c:6750 authenticate_verify: requested inkey 'allstar' for RSA authentication does not exist
[Jan 23 19:18:34] NOTICE[697]: chan_iax2.c:9459 socket_process: Host 67.215.233.178 failed to authenticate as allstar-sys
Any suggestions or direction on the above two issues would be appreciated.
Thank you,
Greg
W2GCM
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.