Play audio file based on node numbers connected
How would I play an audio file based on a node connected, either when I make the connection, or upon interrogation. Such as: "connected to W3WAN, receive only", or "connected to "winsystem, Transceive". This way if someone is monitoring a channel, I can poll the system for status. My apology if this has been asked before. 73, Eric 4Z1UG / WA6IGR Allstar Node: 28422 Check out my Podcast at: www.qsotoday.com<http://www.qsotoday.com> 4Z1UG@guth.us<mailto:4Z1UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840 Skype: ericrguth
There is a command for that called ilink,5. Which touch tone command your system uses for that command is optional. Look through your rpt.conf for ilink,5 and you may see something like 70=ilink,5 ; say link status In this case the touch tone command is *70. If the above line or similar is not there you can add it or one like it. Then restart Asterisk. Now when you play *70 it will read the node ‘numbers’ that are connected to you. To get it to say “Win system” instead of “Node 2560” you have to make a recording and place in in the correct directory. That is documented here: http://docs.allstarlink.org/drupal/node/131 <http://docs.allstarlink.org/drupal/node/131> and here http://images.ohnosec.org/app-rpt-audacity.pdf <http://images.ohnosec.org/app-rpt-audacity.pdf> -- Tim :wq
On Apr 6, 2015, at 1:23 PM, Eric Guth <eric@efratnetworks.com> wrote:
How would I play an audio file based on a node connected, either when I make the connection, or upon interrogation.
Such as: "connected to W3WAN, receive only", or "connected to "winsystem, Transceive".
This way if someone is monitoring a channel, I can poll the system for status.
My apology if this has been asked before.
73,
Eric 4Z1UG / WA6IGR Allstar Node: 28422 Check out my Podcast at: www.qsotoday.com <http://www.qsotoday.com/> 4Z1UG@guth.us <mailto:4Z1UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840
Skype: ericrguth
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks Tim and Kyle for your responses. I now know how to start. 73, Eric 4Z1UG / WA6IGR Allstar Node: 28422 Check out my Podcast at: www.qsotoday.com<http://www.qsotoday.com> 4Z1UG@guth.us<mailto:4Z1UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840 Skype: ericrguth From: Tim Sawyer [mailto:tim.sawyer@mac.com] Sent: Tuesday, April 07, 2015 12:53 AM To: Eric Guth Cc: app_rpt-users Subject: Re: [App_rpt-users] Play audio file based on node numbers connected There is a command for that called ilink,5. Which touch tone command your system uses for that command is optional. Look through your rpt.conf for ilink,5 and you may see something like 70=ilink,5 ; say link status In this case the touch tone command is *70. If the above line or similar is not there you can add it or one like it. Then restart Asterisk. Now when you play *70 it will read the node ‘numbers’ that are connected to you. To get it to say “Win system” instead of “Node 2560” you have to make a recording and place in in the correct directory. That is documented here: http://docs.allstarlink.org/drupal/node/131 and here http://images.ohnosec.org/app-rpt-audacity.pdf -- Tim :wq On Apr 6, 2015, at 1:23 PM, Eric Guth <eric@efratnetworks.com<mailto:eric@efratnetworks.com>> wrote: How would I play an audio file based on a node connected, either when I make the connection, or upon interrogation. Such as: "connected to W3WAN, receive only", or "connected to "winsystem, Transceive". This way if someone is monitoring a channel, I can poll the system for status. My apology if this has been asked before. 73, Eric 4Z1UG / WA6IGR Allstar Node: 28422 Check out my Podcast at: www.qsotoday.com<http://www.qsotoday.com/> 4Z1UG@guth.us<mailto:4Z1UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840 Skype: ericrguth _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
Eric Guth -
Tim Sawyer