Well, the time has come for me to eat some Pi topped with ASL sprinkles, I have a goal of using it for the TXr on a my revised split site 6m repeater, So, I have ordered a bunch of different Pi's to taste but I don't see the min requirements for the hardware, Will the image run on a Orange Pi zero w512mb (I would think it does) or does this need 1gb perhaps it's there and I just overlooked it speed reading....LOL The different flavors have not yet arrived so I have plenty of time. ...mike/kb8jnm
You might want to add an extra fan if you are going to use the orange pi. They tend to get very hot. 73 N2DYN Angelo -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Wednesday, June 20, 2018 6:10 PM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] ASL Pi hardware requirements ? Well, the time has come for me to eat some Pi topped with ASL sprinkles, I have a goal of using it for the TXr on a my revised split site 6m repeater, So, I have ordered a bunch of different Pi's to taste but I don't see the min requirements for the hardware, Will the image run on a Orange Pi zero w512mb (I would think it does) or does this need 1gb perhaps it's there and I just overlooked it speed reading....LOL The different flavors have not yet arrived so I have plenty of time. ...mike/kb8jnm _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I prefer the NanoPi NEO <http://www.friendlyarm.com/index.php?route=product/product&product_id=132> Order the heat sink also. There is a ASL 1.01 image for it. 73, Steve N4IRS On 06/20/2018 06:10 PM, Mike wrote:
Well, the time has come for me to eat some Pi topped with ASL sprinkles,
I have a goal of using it for the TXr on a my revised split site 6m repeater,
So, I have ordered a bunch of different Pi's to taste but I don't see the min requirements for the hardware,
Will the image run on a Orange Pi zero w512mb (I would think it does) or does this need 1gb
perhaps it's there and I just overlooked it speed reading....LOL
The different flavors have not yet arrived so I have plenty of time.
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks Steve and Angelo So it sounds like just a little thin heatsink will fix it up. I have lots of cooling goodies laying around. But I have one of those Steve but it's 256m so don't figure I'll do much with that. I have download the image and tried it in that nano, no boot. It may be defective. but i'm in the experimental mood so I ordered a few different ones to test. I have to say, so far I do like the zero-w But I have not check enough to know how great that is. But I think i want one more just to have. When you got your first VW, it was the greatest car in the world till you got the Pontiac...LOL I also have a pi3b+ coming since the 1.4ghz and wifi are appealing to me at this point. ...mike/kb8jnm On 6/20/2018 9:29 PM, Steve Zingman wrote:
I prefer the NanoPi NEO <http://www.friendlyarm.com/index.php?route=product/product&product_id=132> Order the heat sink also. There is a ASL 1.01 image for it.
73, Steve N4IRS
On 06/20/2018 06:10 PM, Mike wrote:
Well, the time has come for me to eat some Pi topped with ASL sprinkles,
I have a goal of using it for the TXr on a my revised split site 6m repeater,
So, I have ordered a bunch of different Pi's to taste but I don't see the min requirements for the hardware,
Will the image run on a Orange Pi zero w512mb (I would think it does) or does this need 1gb
perhaps it's there and I just overlooked it speed reading....LOL
The different flavors have not yet arrived so I have plenty of time.
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Not a fan of the Pi Zero W. I prefer a Ethernet connector. If your NanaoPi is a NEO not a NEO2 it should boot with this <https://dl.armbian.com/nanopineo/Debian_stretch_next.7z> or the ASL 1.01 image for the NEO. Steve On 06/20/2018 10:00 PM, Mike wrote:
Thanks Steve and Angelo
So it sounds like just a little thin heatsink will fix it up. I have lots of cooling goodies laying around. But I have one of those Steve but it's 256m so don't figure I'll do much with that. I have download the image and tried it in that nano, no boot. It may be defective.
but i'm in the experimental mood so I ordered a few different ones to test. I have to say, so far I do like the zero-w But I have not check enough to know how great that is. But I think i want one more just to have. When you got your first VW, it was the greatest car in the world till you got the Pontiac...LOL I also have a pi3b+ coming since the 1.4ghz and wifi are appealing to me at this point.
...mike/kb8jnm
On 6/20/2018 9:29 PM, Steve Zingman wrote:
I prefer the NanoPi NEO <http://www.friendlyarm.com/index.php?route=product/product&product_id=132> Order the heat sink also. There is a ASL 1.01 image for it.
73, Steve N4IRS
On 06/20/2018 06:10 PM, Mike wrote:
Well, the time has come for me to eat some Pi topped with ASL sprinkles,
I have a goal of using it for the TXr on a my revised split site 6m repeater,
So, I have ordered a bunch of different Pi's to taste but I don't see the min requirements for the hardware,
Will the image run on a Orange Pi zero w512mb (I would think it does) or does this need 1gb
perhaps it's there and I just overlooked it speed reading....LOL
The different flavors have not yet arrived so I have plenty of time.
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I always gone with pi3b raspberry. Do have two pi3b+ raspberry, but only have one of those deployed as a repeater site link. They have a 14 battery backup. Running the bridge just on pi3b. I started using heat sinks and fans. Do have one pi out in a field in the Texas heat, no fan, or heat sinks. It has lived for over a year. -------- Original message --------From: Mike <mm@midnighteng.com> Date: 6/20/18 5:10 PM (GMT-06:00) To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] ASL Pi hardware requirements ? Well, the time has come for me to eat some Pi topped with ASL sprinkles, I have a goal of using it for the TXr on a my revised split site 6m repeater, So, I have ordered a bunch of different Pi's to taste but I don't see the min requirements for the hardware, Will the image run on a Orange Pi zero w512mb (I would think it does) or does this need 1gb perhaps it's there and I just overlooked it speed reading....LOL The different flavors have not yet arrived so I have plenty of time. ...mike/kb8jnm _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Angelo T Sonnesso -
David -
Mike -
Steve Zingman