I always gone with pi3b raspberry. Do have two pi3b+ raspberry, but only have one of those deployed as a repeater site link. They have a 14 battery backup. Running the bridge just on pi3b. I started using heat sinks and fans. Do have one pi out in a field in the Texas heat, no fan, or heat sinks. It has lived for over a year. -------- Original message --------From: Mike <mm@midnighteng.com> Date: 6/20/18 5:10 PM (GMT-06:00) To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] ASL Pi hardware requirements ? Well, the time has come for me to eat some Pi topped with ASL sprinkles, I have a goal of using it for the TXr on a my revised split site 6m repeater, So, I have ordered a bunch of different Pi's to taste but I don't see the min requirements for the hardware, Will the image run on a Orange Pi zero w512mb (I would think it does) or does this need 1gb perhaps it's there and I just overlooked it speed reading....LOL The different flavors have not yet arrived so I have plenty of time. ...mike/kb8jnm _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
