Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
Hello Jim, Can you please post the necessary steps to obtain and install said file in simple terms please. Thank you, D On 10/10/2010 19:30:49, Jim Duuuude (telesistant@hotmail.com) wrote:
I discovered (not with any help from the lack of documentation from C-media) that the 'HOOK' signal is actually available to be read (but not written). Therefore, the "GPIO2" signal can at least now be used as an input.
The code revision (chan_usbradio.c) to support this should be available via SVN at abut 12:15 PDT today (when the public SVN server updates).
Well, it's better then nothing......
JIM WB6NIL
Probably the easiest to follow the instructions in the following: https://allstarlink.org/support.html#astupgrade
Date: Sun, 10 Oct 2010 19:37:36 +0100 From: specialq.que@ntlworld.com To: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
Hello Jim,
Can you please post the necessary steps to obtain and install said file in simple terms please.
Thank you, D
On 10/10/2010 19:30:49, Jim Duuuude (telesistant@hotmail.com) wrote:
I discovered (not with any help from the lack of documentation from C-media) that the 'HOOK' signal is actually available to be read (but not written). Therefore, the "GPIO2" signal can at least now be used as an input.
The code revision (chan_usbradio.c) to support this should be available via SVN at abut 12:15 PDT today (when the public SVN server updates).
Well, it's better then nothing......
JIM WB6NIL
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
I've tried several times to use the procedure outlined in the link provided below. As far as I know, I've applied the "special" patches that are supposed to allow wget to download the svn-trunk.tar.gz file on a Limey Linux box (brand new install) to no avail. Transcript follows: [root@test usr]# wget http://allstarlink.org/svn-trunk.tar.gz --19:52:24-- http://allstarlink.org/svn-trunk.tar.gz => `svn-trunk.tar.gz' Resolving allstarlink.org... 67.215.233.179 Connecting to allstarlink.org|67.215.233.179|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://allstarlink.org/svn-trunk.tar.gz [following] https://allstarlink.org/svn-trunk.tar.gz: Unsupported scheme. This is on LL: Limey-linux micro linux distribution version 1.1.0 I usually end up downloading the svn-trunk.tar.gz on another system then scp over to the Limey Linux box I'm building. Basically, I'm rebuilding node 2065/2066 for CalNet to bring them up to the latest version. It will be manual configuration (Jim knows why). Any Ideas why wget won't work to get the latest stuff? On Sun, Oct 10, 2010 at 12:42 PM, Jim Duuuude <telesistant@hotmail.com> wrote:
Probably the easiest to follow the instructions in the following:
https://allstarlink.org/support.html#astupgrade
Date: Sun, 10 Oct 2010 19:37:36 +0100 From: specialq.que@ntlworld.com To: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
Hello Jim,
Can you please post the necessary steps to obtain and install said file in simple terms please.
Thank you, D
On 10/10/2010 19:30:49, Jim Duuuude (telesistant@hotmail.com) wrote:
I discovered (not with any help from the lack of documentation from C-media) that the 'HOOK' signal is actually available to be read (but not written). Therefore, the "GPIO2" signal can at least now be used as an input.
The code revision (chan_usbradio.c) to support this should be available via SVN at abut 12:15 PDT today (when the public SVN server updates).
Well, it's better then nothing......
JIM WB6NIL
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- Randy Hammock KC6HUR http://kc6hur.net/~rhammock IRLP 4494 / ALLSTAR 2035
Yes, that *is* a good point. wget on Limey Linux doesnt support https:, but curl does. Steve didnt think (rather logically so) that it was necessary to go to the trouble of making wget do that when curl works perfectly well. Sorry for overlooking this in the instructions. I should have taken this info consideration as part of the cut-over from http to https on 8/15. I will fix the docs to reflect this. btw, I already re-built the 2065/2066 node image and Marshall already has the link to download it and burn it onto a flash. JIM
Date: Mon, 11 Oct 2010 20:12:37 -0700 From: rhammock.hur@gmail.com To: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
I've tried several times to use the procedure outlined in the link provided below. As far as I know, I've applied the "special" patches that are supposed to allow wget to download the svn-trunk.tar.gz file on a Limey Linux box (brand new install) to no avail. Transcript follows:
[root@test usr]# wget http://allstarlink.org/svn-trunk.tar.gz --19:52:24-- http://allstarlink.org/svn-trunk.tar.gz => `svn-trunk.tar.gz' Resolving allstarlink.org... 67.215.233.179 Connecting to allstarlink.org|67.215.233.179|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://allstarlink.org/svn-trunk.tar.gz [following] https://allstarlink.org/svn-trunk.tar.gz: Unsupported scheme.
This is on LL:
Limey-linux micro linux distribution version 1.1.0
I usually end up downloading the svn-trunk.tar.gz on another system then scp over to the Limey Linux box I'm building.
Basically, I'm rebuilding node 2065/2066 for CalNet to bring them up to the latest version. It will be manual configuration (Jim knows why).
Any Ideas why wget won't work to get the latest stuff?
On Sun, Oct 10, 2010 at 12:42 PM, Jim Duuuude <telesistant@hotmail.com> wrote:
Probably the easiest to follow the instructions in the following:
https://allstarlink.org/support.html#astupgrade
Date: Sun, 10 Oct 2010 19:37:36 +0100 From: specialq.que@ntlworld.com To: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
Hello Jim,
Can you please post the necessary steps to obtain and install said file in simple terms please.
Thank you, D
On 10/10/2010 19:30:49, Jim Duuuude (telesistant@hotmail.com) wrote:
I discovered (not with any help from the lack of documentation from C-media) that the 'HOOK' signal is actually available to be read (but not written). Therefore, the "GPIO2" signal can at least now be used as an input.
The code revision (chan_usbradio.c) to support this should be available via SVN at abut 12:15 PDT today (when the public SVN server updates).
Well, it's better then nothing......
JIM WB6NIL
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- Randy Hammock KC6HUR http://kc6hur.net/~rhammock IRLP 4494 / ALLSTAR 2035 _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Yes, that *is* a good point. wget on Limey Linux doesnt support https:, but curl does. Steve didnt think (rather logically so) that it was necessary to go to the trouble of making wget do that when curl works perfectly well. Sorry for overlooking this in the instructions. I should have taken this info consideration as part of the cut-over from http to https on 8/15. I will fix the docs to reflect this. btw, I already re-built the 2065/2066 node image and Marshall already has the link to download it and burn it onto a flash. JIM
Date: Mon, 11 Oct 2010 20:12:37 -0700 From: rhammock.hur@gmail.com To: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
I've tried several times to use the procedure outlined in the link provided below. As far as I know, I've applied the "special" patches that are supposed to allow wget to download the svn-trunk.tar.gz file on a Limey Linux box (brand new install) to no avail. Transcript follows:
[root@test usr]# wget http://allstarlink.org/svn-trunk.tar.gz --19:52:24-- http://allstarlink.org/svn-trunk.tar.gz => `svn-trunk.tar.gz' Resolving allstarlink.org... 67.215.233.179 Connecting to allstarlink.org|67.215.233.179|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://allstarlink.org/svn-trunk.tar.gz [following] https://allstarlink.org/svn-trunk.tar.gz: Unsupported scheme.
This is on LL:
Limey-linux micro linux distribution version 1.1.0
I usually end up downloading the svn-trunk.tar.gz on another system then scp over to the Limey Linux box I'm building.
Basically, I'm rebuilding node 2065/2066 for CalNet to bring them up to the latest version. It will be manual configuration (Jim knows why).
Any Ideas why wget won't work to get the latest stuff?
On Sun, Oct 10, 2010 at 12:42 PM, Jim Duuuude <telesistant@hotmail.com> wrote:
Probably the easiest to follow the instructions in the following:
https://allstarlink.org/support.html#astupgrade
Date: Sun, 10 Oct 2010 19:37:36 +0100 From: specialq.que@ntlworld.com To: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
Hello Jim,
Can you please post the necessary steps to obtain and install said file in simple terms please.
Thank you, D
On 10/10/2010 19:30:49, Jim Duuuude (telesistant@hotmail.com) wrote:
I discovered (not with any help from the lack of documentation from C-media) that the 'HOOK' signal is actually available to be read (but not written). Therefore, the "GPIO2" signal can at least now be used as an input.
The code revision (chan_usbradio.c) to support this should be available via SVN at abut 12:15 PDT today (when the public SVN server updates).
Well, it's better then nothing......
JIM WB6NIL
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- Randy Hammock KC6HUR http://kc6hur.net/~rhammock IRLP 4494 / ALLSTAR 2035 _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
participants (3)
-
Doug Hutchison -
Jim Duuuude -
Randy Hammock