Probably the easiest to follow the instructions in the following: https://allstarlink.org/support.html#astupgrade
Date: Sun, 10 Oct 2010 19:37:36 +0100 From: specialq.que@ntlworld.com To: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
Hello Jim,
Can you please post the necessary steps to obtain and install said file in simple terms please.
Thank you, D
On 10/10/2010 19:30:49, Jim Duuuude (telesistant@hotmail.com) wrote:
I discovered (not with any help from the lack of documentation from C-media) that the 'HOOK' signal is actually available to be read (but not written). Therefore, the "GPIO2" signal can at least now be used as an input.
The code revision (chan_usbradio.c) to support this should be available via SVN at abut 12:15 PDT today (when the public SVN server updates).
Well, it's better then nothing......
JIM WB6NIL
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users