dtmf decode during phone patch up not working
I have another one... Do *6, get dialtone. Will not decode *0 from radio. CLI of *0 does work, and when patch down and looking at console can see *0 decoded, just not while patch is active. Any thoughts, anyone? Thanks GeorgeC Node 2360 George J Csahanin W2DB Cedar Park, TX
?What is your *0 command supposed to do. KB3ORS Brian 27321 -----Original Message----- From: George Csahanin Sent: Monday, December 27, 2010 12:01 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] dtmf decode during phone patch up not working I have another one... Do *6, get dialtone. Will not decode *0 from radio. CLI of *0 does work, and when patch down and looking at console can see *0 decoded, just not while patch is active. Any thoughts, anyone? Thanks GeorgeC Node 2360 George J Csahanin W2DB Cedar Park, TX _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3342 - Release Date: 12/27/10
Sorry, I thought it was standard. Should dump the patch
From rpt.conf:
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn GeorgeC ----- Original Message ----- From: "KB3ORS - Brian" <kb3ors@windstream.net> To: "George Csahanin" <george@dyb.com>; <app_rpt-users@ohnosec.org> Sent: Monday, December 27, 2010 6:58 PM Subject: Re: [App_rpt-users] dtmf decode during phone patch up not working
?What is your *0 command supposed to do.
KB3ORS Brian 27321
-----Original Message----- From: George Csahanin Sent: Monday, December 27, 2010 12:01 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] dtmf decode during phone patch up not working
I have another one...
Do *6, get dialtone. Will not decode *0 from radio. CLI of *0 does work, and when patch down and looking at console can see *0 decoded, just not while patch is active.
Any thoughts, anyone?
Thanks
GeorgeC Node 2360 George J Csahanin W2DB Cedar Park, TX
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3342 - Release Date: 12/27/10
?In rpt.conf default is # to terminate autopatch. If you dial the 0 while calling someone you will hang up the call. # is the default terminator for autopatch and remote command. Double check the setting in rpt.conf KB3ORS Brian 27321 -----Original Message----- From: George Csahanin Sent: Monday, December 27, 2010 8:26 PM To: KB3ORS - Brian ; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] dtmf decode during phone patch up not working Sorry, I thought it was standard. Should dump the patch
From rpt.conf:
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn GeorgeC ----- Original Message ----- From: "KB3ORS - Brian" <kb3ors@windstream.net> To: "George Csahanin" <george@dyb.com>; <app_rpt-users@ohnosec.org> Sent: Monday, December 27, 2010 6:58 PM Subject: Re: [App_rpt-users] dtmf decode during phone patch up not working
?What is your *0 command supposed to do.
KB3ORS Brian 27321
-----Original Message----- From: George Csahanin Sent: Monday, December 27, 2010 12:01 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] dtmf decode during phone patch up not working
I have another one...
Do *6, get dialtone. Will not decode *0 from radio. CLI of *0 does work, and when patch down and looking at console can see *0 decoded, just not while patch is active.
Any thoughts, anyone?
Thanks
GeorgeC Node 2360 George J Csahanin W2DB Cedar Park, TX
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3342 - Release Date: 12/27/10
----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3342 - Release Date: 12/27/10
On mine, it takes #0 to drop the dial tone (just # will not do it. I think this is the default behavior). Of course, thanks to this: [functions] 0=autopatchdn ; Autopatch down *0 will also bring down the patch - have you tried that?? Ken (using version 0.267)
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of George Csahanin Sent: Monday, December 27, 2010 8:27 PM To: KB3ORS - Brian; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] dtmf decode during phone patch up not working
Sorry, I thought it was standard.
Should dump the patch
From rpt.conf:
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn
GeorgeC
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
That's what I was trying. If the patch is down it decodes, I can see it on the CLI. But if the patch is up, after *6 and getting only dial tone, it will not decode. GeorgeC ----- Original Message ----- From: "Ken" <ke2n@cs.com> To: "'George Csahanin'" <george@dyb.com>; "'KB3ORS - Brian'" <kb3ors@windstream.net>; <app_rpt-users@ohnosec.org> Sent: Monday, December 27, 2010 10:44 PM Subject: RE: [App_rpt-users] dtmf decode during phone patch up not working
On mine, it takes #0 to drop the dial tone (just # will not do it. I think this is the default behavior).
Of course, thanks to this:
[functions] 0=autopatchdn ; Autopatch down
*0 will also bring down the patch - have you tried that??
Ken
(using version 0.267)
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of George Csahanin Sent: Monday, December 27, 2010 8:27 PM To: KB3ORS - Brian; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] dtmf decode during phone patch up not working
Sorry, I thought it was standard.
Should dump the patch
From rpt.conf:
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn
GeorgeC
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
George Csahanin -
KB3ORS - Brian -
Ken