That's what I was trying. If the patch is down it decodes, I can see it on the CLI. But if the patch is up, after *6 and getting only dial tone, it will not decode. GeorgeC ----- Original Message ----- From: "Ken" <ke2n@cs.com> To: "'George Csahanin'" <george@dyb.com>; "'KB3ORS - Brian'" <kb3ors@windstream.net>; <app_rpt-users@ohnosec.org> Sent: Monday, December 27, 2010 10:44 PM Subject: RE: [App_rpt-users] dtmf decode during phone patch up not working
On mine, it takes #0 to drop the dial tone (just # will not do it. I think this is the default behavior).
Of course, thanks to this:
[functions] 0=autopatchdn ; Autopatch down
*0 will also bring down the patch - have you tried that??
Ken
(using version 0.267)
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of George Csahanin Sent: Monday, December 27, 2010 8:27 PM To: KB3ORS - Brian; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] dtmf decode during phone patch up not working
Sorry, I thought it was standard.
Should dump the patch
From rpt.conf:
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn
GeorgeC
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users