Re: [App_rpt-users] Web transceiver?
Hello Ken, Thank you, yes both files exist. TXR works on other remote nodes as do normal connections. Is there an entry in one or other of these files which may be missing. Regards, D On 01/06/2011 6:02 PM, Ken wrote:
Do you have the required config in iax.conf *and* extensions.conf? http://www.xelatec.com/xipar/node/89 it works on my LAN GL Ken
-----Original Message----- From: Doug Hutchison <specialq.que@ntlworld.com> To: app_rpt-users <app_rpt-users@ohnosec.org> Sent: Wed, Jun 1, 2011 11:28 am Subject: [App_rpt-users] Web transceiver?
Is it possible to run the transceiver from a machine on the same lan?
If so, what is needed to correct this error reported by the node machine when a connect is attempted?
NOTICE 6342 Chan_iax2,c : 9459 Socket process: Host xx.xx.xx.xx failed to authenticate as allstar-public
(IP address removed)
Thank you, Doug
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Doug Sorry I thought you were using iaxRpt, that's why I mentioned the xelatec web site Looking at the way mine is set up I see that I am calling the WAN address and port number (rather than the LAN address). I don't remember but this might have been the only way it worked. Worth a try. My three PC's are on port 4567, 4568 and 4569 so the address I am calling is (for example) 69.243.53.nnn:4568 (I will leave three digits nnn to your imagination) The "name" is the Asterisk node number of course . some of the systems have more than one Asterisk node at the same IP:port For the web transceiver - look for a typo in externsions.conf (extra semicolon) [allstar-public] Presumably, you have web transceiver access enabled in the Portal since it works from elsewhere? Does this work properly from your PC? http://myip.vg ? Then look at the same [] stanza in iax.conf [allstar-public] type=user context=allstar-public auth=md5 secret=(will send you this separately) disallow=all allow=ulaw allow=gsm GL Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Doug Hutchison Sent: Wednesday, June 01, 2011 1:21 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Web transceiver? Hello Ken, Thank you, yes both files exist. TXR works on other remote nodes as do normal connections. Is there an entry in one or other of these files which may be missing. Regards, D On 01/06/2011 6:02 PM, Ken wrote: Do you have the required config in iax.conf *and* extensions.conf? http://www.xelatec.com/xipar/node/89 it works on my LAN GL Ken -----Original Message----- From: Doug Hutchison <mailto:specialq.que@ntlworld.com> <specialq.que@ntlworld.com> To: app_rpt-users <mailto:app_rpt-users@ohnosec.org> <app_rpt-users@ohnosec.org> Sent: Wed, Jun 1, 2011 11:28 am Subject: [App_rpt-users] Web transceiver? Is it possible to run the transceiver from a machine on the same lan? If so, what is needed to correct this error reported by the node machine when a connect is attempted? NOTICE 6342 Chan_iax2,c : 9459 Socket process: Host xx.xx.xx.xx failed to authenticate as allstar-public (IP address removed) Thank you, Doug _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Doug Hutchison -
Ken