I operate 3 nodes and I have 1 node where the Echolink App stops working. There seems to be an error in the program probably causes by something not configured correctly. Here is the printout [Mar 6 10:58:00] NOTICE[27395] chan_echolink.c: Received OK from Echolink server server1.echolink.org [Mar 6 10:58:00] NOTICE[27397] chan_echolink.c: Directory pgm done downloading(partial,compressed), 109 records [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Error in select() [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Exiting chan_echolink, FATAL ERROR!! [Mar 6 10:59:27] NOTICE[27395] chan_echolink.c: Echolink registration thread exited. [Mar 6 10:59:28] NOTICE[27397] chan_echolink.c: Echolink directory thread exited. [Mar 6 10:59:28] WARNING[27389] app_rpt.c: rpt_thread restarted on node 2344 [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 . [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Unable to re-open DSP device 1 (usb2344): Device or resource busy [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 . [Mar 6 10:59:29] WARNING[28624] chan_usbradio.c: Possibly stuck USB read channel. [usb2344] [Mar 6 10:59:29] WARNING[28624] chan_usbradio.c: Nope, USB read channel [usb2344] wasn't stuck after all. [root@Asterisk-ve3yyz asterisk]# [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Error in select() It looks like the error is in the select portion of chan_echolink.c Anyone run into this error before? Eric Meth - ve3ei Node 2344, 2425, 2579, 2593, 27135
Are you running app_gps??? If so, I seem to remember a similar problem which I believe can be cured with an upgrade to latest SVN JIM From: ve3ei@iescomm.ca To: app_rpt-users@ohnosec.org Date: Sun, 6 Mar 2011 14:56:21 -0500 Subject: [App_rpt-users] Echolink stops working on Node 2344 I operate 3 nodes and I have 1 node where the Echolink App stops working. There seems to be an error in the program probably causes by something not configured correctly. Here is the printout [Mar 6 10:58:00] NOTICE[27395] chan_echolink.c: Received OK from Echolink server server1.echolink.org [Mar 6 10:58:00] NOTICE[27397] chan_echolink.c: Directory pgm done downloading(partial,compressed), 109 records [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Error in select() [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Exiting chan_echolink, FATAL ERROR!! [Mar 6 10:59:27] NOTICE[27395] chan_echolink.c: Echolink registration thread exited. [Mar 6 10:59:28] NOTICE[27397] chan_echolink.c: Echolink directory thread exited. [Mar 6 10:59:28] WARNING[27389] app_rpt.c: rpt_thread restarted on node 2344 [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 . [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Unable to re-open DSP device 1 (usb2344): Device or resource busy [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 . [Mar 6 10:59:29] WARNING[28624] chan_usbradio.c: Possibly stuck USB read channel. [usb2344] [Mar 6 10:59:29] WARNING[28624] chan_usbradio.c: Nope, USB read channel [usb2344] wasn't stuck after all. [root@Asterisk-ve3yyz asterisk]# [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Error in select() It looks like the error is in the select portion of chan_echolink.c Anyone run into this error before? Eric Meth - ve3ei Node 2344, 2425, 2579, 2593, 27135 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Yes. All 3 nodes are running app_gps but it is only this one that is dying. I am not sure which SVN I am running? Is there an easy way to tell? Eric - ve3ei ----- Original Message ----- From: Jim Duuuude To: ve3ei@iescomm.ca ; app_rpt mailing list Sent: Sunday, March 06, 2011 4:09 PM Subject: RE: [App_rpt-users] Echolink stops working on Node 2344 Are you running app_gps??? If so, I seem to remember a similar problem which I believe can be cured with an upgrade to latest SVN JIM ------------------------------------------------------------------------------ From: ve3ei@iescomm.ca To: app_rpt-users@ohnosec.org Date: Sun, 6 Mar 2011 14:56:21 -0500 Subject: [App_rpt-users] Echolink stops working on Node 2344 I operate 3 nodes and I have 1 node where the Echolink App stops working. There seems to be an error in the program probably causes by something not configured correctly. Here is the printout [Mar 6 10:58:00] NOTICE[27395] chan_echolink.c: Received OK from Echolink server server1.echolink.org [Mar 6 10:58:00] NOTICE[27397] chan_echolink.c: Directory pgm done downloading(partial,compressed), 109 records [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Error in select() [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Exiting chan_echolink, FATAL ERROR!! [Mar 6 10:59:27] NOTICE[27395] chan_echolink.c: Echolink registration thread exited. [Mar 6 10:59:28] NOTICE[27397] chan_echolink.c: Echolink directory thread exited. [Mar 6 10:59:28] WARNING[27389] app_rpt.c: rpt_thread restarted on node 2344 [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 . [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Unable to re-open DSP device 1 (usb2344): Device or resource busy [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 . [Mar 6 10:59:29] WARNING[28624] chan_usbradio.c: Possibly stuck USB read channel. [usb2344] [Mar 6 10:59:29] WARNING[28624] chan_usbradio.c: Nope, USB read channel [usb2344] wasn't stuck after all. [root@Asterisk-ve3yyz asterisk]# [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Error in select() It looks like the error is in the select portion of chan_echolink.c Anyone run into this error before? Eric Meth - ve3ei Node 2344, 2425, 2579, 2593, 27135 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
The problem seemed to be solved with the update of the SVN. Thank you Jim. Eric Meth - ve3ei ----- Original Message ----- From: Jim Duuuude To: ve3ei@iescomm.ca ; app_rpt mailing list Sent: Sunday, March 06, 2011 4:09 PM Subject: RE: [App_rpt-users] Echolink stops working on Node 2344 Are you running app_gps??? If so, I seem to remember a similar problem which I believe can be cured with an upgrade to latest SVN JIM ------------------------------------------------------------------------------ From: ve3ei@iescomm.ca To: app_rpt-users@ohnosec.org Date: Sun, 6 Mar 2011 14:56:21 -0500 Subject: [App_rpt-users] Echolink stops working on Node 2344 I operate 3 nodes and I have 1 node where the Echolink App stops working. There seems to be an error in the program probably causes by something not configured correctly. Here is the printout [Mar 6 10:58:00] NOTICE[27395] chan_echolink.c: Received OK from Echolink server server1.echolink.org [Mar 6 10:58:00] NOTICE[27397] chan_echolink.c: Directory pgm done downloading(partial,compressed), 109 records [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Error in select() [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Exiting chan_echolink, FATAL ERROR!! [Mar 6 10:59:27] NOTICE[27395] chan_echolink.c: Echolink registration thread exited. [Mar 6 10:59:28] NOTICE[27397] chan_echolink.c: Echolink directory thread exited. [Mar 6 10:59:28] WARNING[27389] app_rpt.c: rpt_thread restarted on node 2344 [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 . [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Unable to re-open DSP device 1 (usb2344): Device or resource busy [Mar 6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 . [Mar 6 10:59:29] WARNING[28624] chan_usbradio.c: Possibly stuck USB read channel. [usb2344] [Mar 6 10:59:29] WARNING[28624] chan_usbradio.c: Nope, USB read channel [usb2344] wasn't stuck after all. [root@Asterisk-ve3yyz asterisk]# [Mar 6 10:59:27] ERROR[27396] chan_echolink.c: Error in select() It looks like the error is in the select portion of chan_echolink.c Anyone run into this error before? Eric Meth - ve3ei Node 2344, 2425, 2579, 2593, 27135 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Eric Meth - ve3ei -
Jim Duuuude