Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore. Thanks & 73, Scott KB2EAR
On Jan 16, 2011, at 1:28 PM, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Yep, I've noticed this, too. Well, not the suppression of Echolink, because I never used that. However, W2DB turned me on to the solution, at least, to changing how Echolink nodes are announced (don't think you can suppress, though). Set up DTMF commands for cop 42 43 and 44. Then stick the appropriate one in your startup macro.
-- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Hi everyone, I, too, noticed that echolink announcements went away after upgrading recently....After looking through the app_rpt.c code, I found a "new" variable that seems to need to be set, too. In the node stanza, try this: eannmode=2 tannmode=2 ...This worked for me....Anyone know what "tannmode" is being used for?? 73, David kb4fxc On Sun, 16 Jan 2011, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Yep, there was a problem introduced a while ago. Im surprised no one found it until now. The fixed version (app_rpt version 0.280) will be available from SVN after 17:15 PST today. Thanks to everyone who helped point this out. JIM WB6NIL
Date: Sun, 16 Jan 2011 17:00:24 -0500 From: kb4fxc@inttek.net To: kb2ear@kb2ear.net CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Echolink announcements.
Hi everyone,
I, too, noticed that echolink announcements went away after upgrading recently....After looking through the app_rpt.c code, I found a "new" variable that seems to need to be set, too. In the node stanza, try this:
eannmode=2 tannmode=2
...This worked for me....Anyone know what "tannmode" is being used for??
73, David kb4fxc
On Sun, 16 Jan 2011, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I just installed it here. I now have callsigns again, but still can't turn of the announcements all together. Thanks & 73, Scott KB2EAR From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, January 16, 2011 7:37 PM To: kb4fxc@inttek.net; kb2ear@kb2ear.net Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Echolink announcements. Yep, there was a problem introduced a while ago. Im surprised no one found it until now. The fixed version (app_rpt version 0.280) will be available from SVN after 17:15 PST today. Thanks to everyone who helped point this out. JIM WB6NIL
Date: Sun, 16 Jan 2011 17:00:24 -0500 From: kb4fxc@inttek.net To: kb2ear@kb2ear.net CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Echolink announcements.
Hi everyone,
I, too, noticed that echolink announcements went away after upgrading recently....After looking through the app_rpt.c code, I found a "new" variable that seems to need to be set, too. In the node stanza, try this:
eannmode=2 tannmode=2
...This worked for me....Anyone know what "tannmode" is being used for??
73, David kb4fxc
On Sun, 16 Jan 2011, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Frankly, I wasnt aware that you were supposed to be able to turn them off completely. Where did you get the idea that it does this?? JIM From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Sun, 16 Jan 2011 23:45:12 -0500 I just installed it here. I now have callsigns again, but still can’t turn of the announcements all together. Thanks & 73, Scott KB2EAR From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, January 16, 2011 7:37 PM To: kb4fxc@inttek.net; kb2ear@kb2ear.net Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Echolink announcements. Yep, there was a problem introduced a while ago. Im surprised no one found it until now. The fixed version (app_rpt version 0.280) will be available from SVN after 17:15 PST today. Thanks to everyone who helped point this out. JIM WB6NIL
Date: Sun, 16 Jan 2011 17:00:24 -0500 From: kb4fxc@inttek.net To: kb2ear@kb2ear.net CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Echolink announcements.
Hi everyone,
I, too, noticed that echolink announcements went away after upgrading recently....After looking through the app_rpt.c code, I found a "new" variable that seems to need to be set, too. In the node stanza, try this:
eannmode=2 tannmode=2
...This worked for me....Anyone know what "tannmode" is being used for??
73, David kb4fxc
On Sun, 16 Jan 2011, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
http://ohnosec.org/drupal/node/107 eannmode 0 = do not announce Echolink nodes at all, 1 = announce only the node number (Allstar-translated), 2 = announce only the call of the echolink station, 3 = announce both 1 echolinkdefault 0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry output on command execution and for a short time thereafter, 3 = follow local telemetry mode 2 Thanks & 73, Scott KB2EAR From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Monday, January 17, 2011 12:42 AM To: kb2ear@kb2ear.net; kb4fxc@inttek.net Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Echolink announcements. Frankly, I wasnt aware that you were supposed to be able to turn them off completely. Where did you get the idea that it does this?? JIM _____ From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Sun, 16 Jan 2011 23:45:12 -0500 I just installed it here. I now have callsigns again, but still can't turn of the announcements all together. Thanks & 73, Scott KB2EAR From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, January 16, 2011 7:37 PM To: kb4fxc@inttek.net; kb2ear@kb2ear.net Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Echolink announcements. Yep, there was a problem introduced a while ago. Im surprised no one found it until now. The fixed version (app_rpt version 0.280) will be available from SVN after 17:15 PST today. Thanks to everyone who helped point this out. JIM WB6NIL
Date: Sun, 16 Jan 2011 17:00:24 -0500 From: kb4fxc@inttek.net To: kb2ear@kb2ear.net CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Echolink announcements.
Hi everyone,
I, too, noticed that echolink announcements went away after upgrading recently....After looking through the app_rpt.c code, I found a "new" variable that seems to need to be set, too. In the node stanza, try this:
eannmode=2 tannmode=2
...This worked for me....Anyone know what "tannmode" is being used for??
73, David kb4fxc
On Sun, 16 Jan 2011, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
excellent point. Well, should I change the documentation to match the design, or change the design to match the documentation? JIM From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Mon, 17 Jan 2011 11:08:33 -0500 http://ohnosec.org/drupal/node/107 eannmode 0 = do not announce Echolink nodes at all, 1 = announce only the node number (Allstar-translated), 2 = announce only the call of the echolink station, 3 = announce both 1echolinkdefault 0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry output on command execution and for a short time thereafter, 3 = follow local telemetry mode 2Thanks & 73,Scott KB2EAR From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Monday, January 17, 2011 12:42 AM To: kb2ear@kb2ear.net; kb4fxc@inttek.net Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Echolink announcements. Frankly, I wasnt aware that you were supposed to be able to turn them off completely. Where did you get the idea that it does this?? JIM From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Sun, 16 Jan 2011 23:45:12 -0500I just installed it here. I now have callsigns again, but still can’t turn of the announcements all together. Thanks & 73, Scott KB2EAR From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, January 16, 2011 7:37 PM To: kb4fxc@inttek.net; kb2ear@kb2ear.net Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Echolink announcements. Yep, there was a problem introduced a while ago. Im surprised no one found it until now. The fixed version (app_rpt version 0.280) will be available from SVN after 17:15 PST today. Thanks to everyone who helped point this out. JIM WB6NIL
Date: Sun, 16 Jan 2011 17:00:24 -0500 From: kb4fxc@inttek.net To: kb2ear@kb2ear.net CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Echolink announcements.
Hi everyone,
I, too, noticed that echolink announcements went away after upgrading recently....After looking through the app_rpt.c code, I found a "new" variable that seems to need to be set, too. In the node stanza, try this:
eannmode=2 tannmode=2
...This worked for me....Anyone know what "tannmode" is being used for??
73, David kb4fxc
On Sun, 16 Jan 2011, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Well, I dont have any Echolink on any of my nodes and I would like to disable all echolink connect and disconnect messages (on my end) that may come through when a node that does have echolink is connected. to mine. I'm not anti Echolink, but I find that people on echolink tend to connect to nodes, monitor for 1 nano second, and if they don't hear anything disconnect. What happens on the other end (my end) is 5 minutes of connect message and then 5 minutes of disconnect messages! So my vote is to make it work as described, that way it will be up to the node owner to customize as required. Jon On 1/17/2011 11:17 AM, Jim Duuuude wrote:
excellent point. Well, should I change the documentation to match the design, or change the design to match the documentation?
JIM
------------------------------------------------------------------------ From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Mon, 17 Jan 2011 11:08:33 -0500
http://ohnosec.org/drupal/node/107
eannmode
0 = do not announce Echolink nodes at all, 1 = announce only the node number (Allstar-translated), 2 = announce only the call of the echolink station, 3 = announce both
1
echolinkdefault
0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry output on command execution and for a short time thereafter, 3 = follow local telemetry mode
2
Thanks & 73,
Scott KB2EAR
*From:*Jim Duuuude [mailto:telesistant@hotmail.com] *Sent:* Monday, January 17, 2011 12:42 AM *To:* kb2ear@kb2ear.net; kb4fxc@inttek.net *Cc:* app_rpt mailing list *Subject:* RE: [App_rpt-users] Echolink announcements.
Frankly, I wasnt aware that you were supposed to be able to turn them off completely. Where did you get the idea that it does this??
JIM
------------------------------------------------------------------------
From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Sun, 16 Jan 2011 23:45:12 -0500
I just installed it here. I now have callsigns again, but still can’t turn of the announcements all together.
Thanks & 73,
Scott KB2EAR
*From:*Jim Duuuude [mailto:telesistant@hotmail.com] *Sent:* Sunday, January 16, 2011 7:37 PM *To:* kb4fxc@inttek.net; kb2ear@kb2ear.net *Cc:* app_rpt mailing list *Subject:* RE: [App_rpt-users] Echolink announcements.
Yep, there was a problem introduced a while ago. Im surprised no one found it until now. The fixed version (app_rpt version 0.280) will be available from SVN after 17:15 PST today.
Thanks to everyone who helped point this out.
JIM WB6NIL
Date: Sun, 16 Jan 2011 17:00:24 -0500 From: kb4fxc@inttek.net <mailto:kb4fxc@inttek.net> To: kb2ear@kb2ear.net <mailto:kb2ear@kb2ear.net> CC: app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Echolink announcements.
Hi everyone,
I, too, noticed that echolink announcements went away after upgrading recently....After looking through the app_rpt.c code, I found a "new" variable that seems to need to be set, too. In the node stanza, try this:
eannmode=2 tannmode=2
...This worked for me....Anyone know what "tannmode" is being used for??
73, David kb4fxc
On Sun, 16 Jan 2011, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
i see your point. Perhaps my documentation error was a Freudian slip.. Or was that what Sigmund Freud's wife wore under her skirt? :-). Anyway, I think I'll take the "change the design to match the documentation" option... JIM Date: Mon, 17 Jan 2011 11:33:13 -0500 From: jrorke@cogeco.ca To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Echolink announcements. Well, I dont have any Echolink on any of my nodes and I would like to disable all echolink connect and disconnect messages (on my end) that may come through when a node that does have echolink is connected. to mine. I'm not anti Echolink, but I find that people on echolink tend to connect to nodes, monitor for 1 nano second, and if they don't hear anything disconnect. What happens on the other end (my end) is 5 minutes of connect message and then 5 minutes of disconnect messages! So my vote is to make it work as described, that way it will be up to the node owner to customize as required. Jon On 1/17/2011 11:17 AM, Jim Duuuude wrote: excellent point. Well, should I change the documentation to match the design, or change the design to match the documentation? JIM From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Mon, 17 Jan 2011 11:08:33 -0500 http://ohnosec.org/drupal/node/107 eannmode 0 = do not announce Echolink nodes at all, 1 = announce only the node number (Allstar-translated), 2 = announce only the call of the echolink station, 3 = announce both 1 echolinkdefault 0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry output on command execution and for a short time thereafter, 3 = follow local telemetry mode 2 Thanks & 73, Scott KB2EAR From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Monday, January 17, 2011 12:42 AM To: kb2ear@kb2ear.net; kb4fxc@inttek.net Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Echolink announcements. Frankly, I wasnt aware that you were supposed to be able to turn them off completely. Where did you get the idea that it does this?? JIM From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Sun, 16 Jan 2011 23:45:12 -0500 I just installed it here. I now have callsigns again, but still can’t turn of the announcements all together. Thanks & 73, Scott KB2EAR From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, January 16, 2011 7:37 PM To: kb4fxc@inttek.net; kb2ear@kb2ear.net Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Echolink announcements. Yep, there was a problem introduced a while ago. Im surprised no one found it until now. The fixed version (app_rpt version 0.280) will be available from SVN after 17:15 PST today. Thanks to everyone who helped point this out. JIM WB6NIL > Date: Sun, 16 Jan 2011 17:00:24 -0500 > From: kb4fxc@inttek.net > To: kb2ear@kb2ear.net > CC: app_rpt-users@ohnosec.org > Subject: Re: [App_rpt-users] Echolink announcements. > > > Hi everyone, > > I, too, noticed that echolink announcements went away after upgrading > recently....After looking through the app_rpt.c code, I found a "new" > variable that seems to need to be set, too. In the node stanza, try this: > > eannmode=2 > tannmode=2 > > ...This worked for me....Anyone know what "tannmode" is being used for?? > > 73, David kb4fxc > > > On Sun, 16 Jan 2011, Scott Weis wrote: > > > Has anyone else noticed that the eannmode= and echolinkdefault= no longer > > work? I have eannmode=0 and echolinkdefault=0 and still get echolink > > announcements. Also when eannmode=2 or 3 I do not get callsigns anymore. > > > > Thanks & 73, > > Scott KB2EAR > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users@ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
The new version of app_rpt in SVN implements eannmode that reflects the documentation (you can turn off announcements by setting it to 0). JIM WB6NIL
By the way, tannmode has nothing to do with echolink. Its for the TheLinkBox support.
Date: Sun, 16 Jan 2011 17:00:24 -0500 From: kb4fxc@inttek.net To: kb2ear@kb2ear.net CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Echolink announcements.
Hi everyone,
I, too, noticed that echolink announcements went away after upgrading recently....After looking through the app_rpt.c code, I found a "new" variable that seems to need to be set, too. In the node stanza, try this:
eannmode=2 tannmode=2
...This worked for me....Anyone know what "tannmode" is being used for??
73, David kb4fxc
On Sun, 16 Jan 2011, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (5)
-
Buddy Brannan -
David McGough -
Jim Duuuude -
Jon Rorke -
Scott Weis