Well, I dont have any Echolink on any of my nodes and I would like to disable all echolink connect and disconnect messages (on my end) that may come through when a node that does have echolink is connected. to mine. I'm not anti Echolink, but I find that people on echolink tend to connect to nodes, monitor for 1 nano second, and if they don't hear anything disconnect. What happens on the other end (my end) is 5 minutes of connect message and then 5 minutes of disconnect messages! So my vote is to make it work as described, that way it will be up to the node owner to customize as required. Jon On 1/17/2011 11:17 AM, Jim Duuuude wrote:
excellent point. Well, should I change the documentation to match the design, or change the design to match the documentation?
JIM
------------------------------------------------------------------------ From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Mon, 17 Jan 2011 11:08:33 -0500
http://ohnosec.org/drupal/node/107
eannmode
0 = do not announce Echolink nodes at all, 1 = announce only the node number (Allstar-translated), 2 = announce only the call of the echolink station, 3 = announce both
1
echolinkdefault
0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry output on command execution and for a short time thereafter, 3 = follow local telemetry mode
2
Thanks & 73,
Scott KB2EAR
*From:*Jim Duuuude [mailto:telesistant@hotmail.com] *Sent:* Monday, January 17, 2011 12:42 AM *To:* kb2ear@kb2ear.net; kb4fxc@inttek.net *Cc:* app_rpt mailing list *Subject:* RE: [App_rpt-users] Echolink announcements.
Frankly, I wasnt aware that you were supposed to be able to turn them off completely. Where did you get the idea that it does this??
JIM
------------------------------------------------------------------------
From: kb2ear@kb2ear.net To: telesistant@hotmail.com; kb4fxc@inttek.net CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Echolink announcements. Date: Sun, 16 Jan 2011 23:45:12 -0500
I just installed it here. I now have callsigns again, but still can’t turn of the announcements all together.
Thanks & 73,
Scott KB2EAR
*From:*Jim Duuuude [mailto:telesistant@hotmail.com] *Sent:* Sunday, January 16, 2011 7:37 PM *To:* kb4fxc@inttek.net; kb2ear@kb2ear.net *Cc:* app_rpt mailing list *Subject:* RE: [App_rpt-users] Echolink announcements.
Yep, there was a problem introduced a while ago. Im surprised no one found it until now. The fixed version (app_rpt version 0.280) will be available from SVN after 17:15 PST today.
Thanks to everyone who helped point this out.
JIM WB6NIL
Date: Sun, 16 Jan 2011 17:00:24 -0500 From: kb4fxc@inttek.net <mailto:kb4fxc@inttek.net> To: kb2ear@kb2ear.net <mailto:kb2ear@kb2ear.net> CC: app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Echolink announcements.
Hi everyone,
I, too, noticed that echolink announcements went away after upgrading recently....After looking through the app_rpt.c code, I found a "new" variable that seems to need to be set, too. In the node stanza, try this:
eannmode=2 tannmode=2
...This worked for me....Anyone know what "tannmode" is being used for??
73, David kb4fxc
On Sun, 16 Jan 2011, Scott Weis wrote:
Has anyone else noticed that the eannmode= and echolinkdefault= no longer work? I have eannmode=0 and echolinkdefault=0 and still get echolink announcements. Also when eannmode=2 or 3 I do not get callsigns anymore.
Thanks & 73, Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users