Host not acknowledging non-GPS disciplined operation
I am new to All-Star and have set up a server on an Intel i3 and am trying to get it to work with my RTCM acquired from Micro-Node. I had it linking to Mark's server at Micro-Node, but when I tried to set up my server using the same settings in voter.conf and rpt.conf I get the following error message on the RTCM repeatedly scrolling down the screen: <System Time Not Set> ERROR! Host not acknowledging non-GPS disciplined operation. If I change the Host password on the RTCM, it will stop scrolling the error message, but of course is not connected. I am uncertain as to where I should look to debug the issue. Any thoughts? Craig Sande AE7I Node 40586
Well, that whole thing is just a LWEM (Lousily-worded error message) (I can say that, as I was the one who lousily-worded it!). It simply means, that, while in a mode that is non-GPS oriented, the server is not accepting the connection. It could be from a number of mis-configurations, such incorrect password, a Voter.conf set up with a master, but with no master present, etc.. there could be many. Jim WB6NIL Date: Sat, 8 Feb 2014 17:45:26 -0800 From: cmsande@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Host not acknowledging non-GPS disciplined operation I am new to All-Star and have set up a server on an Intel i3 and am trying to get it to work with my RTCM acquired from Micro-Node. I had it linking to Mark's server at Micro-Node, but when I tried to set up my server using the same settings in voter.conf and rpt.conf I get the following error message on the RTCM repeatedly scrolling down the screen: <System Time Not Set> ERROR! Host not acknowledging non-GPS disciplined operation. If I change the Host password on the RTCM, it will stop scrolling the error message, but of course is not connected. I am uncertain as to where I should look to debug the issue. Any thoughts? Craig Sande AE7I Node 40586 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
No problem Jim. After looking at how others set up voter.conf I found a syntax issue. Once corrected, everything has worked flawlessly. My initial voter.conf was missing the [40586] line and had 1259 = xxxx,nodeemp,transmit,ulaw. (1259 is the serial number for my RTCM.) My functioning version of voter.comf is: ; chan_voter configuration ; ; [general] port = 667 buflen = 300 password = xxxx [40586] 40586 = xxxx,nodeemp,transmit plfilter = y My only question mark left is whether or not to use "ulaw" (as I saw in a version sent to me) or "mulaw" in the line. Craig, AE7I On Sun, Feb 9, 2014 at 10:56 AM, Jim Duuuude <telesistant@hotmail.com>wrote:
Well, that whole thing is just a LWEM (Lousily-worded error message) (I can say that, as I was the one who lousily-worded it!).
It simply means, that, while in a mode that is non-GPS oriented, the server is not accepting the connection. It could be from a number of mis-configurations, such incorrect password, a Voter.conf set up with a master, but with no master present, etc.. there could be many.
Jim WB6NIL
------------------------------ Date: Sat, 8 Feb 2014 17:45:26 -0800 From: cmsande@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Host not acknowledging non-GPS disciplined operation
I am new to All-Star and have set up a server on an Intel i3 and am trying to get it to work with my RTCM acquired from Micro-Node. I had it linking to Mark's server at Micro-Node, but when I tried to set up my server using the same settings in voter.conf and rpt.conf I get the following error message on the RTCM repeatedly scrolling down the screen:
<System Time Not Set> ERROR! Host not acknowledging non-GPS disciplined operation.
If I change the Host password on the RTCM, it will stop scrolling the error message, but of course is not connected. I am uncertain as to where I should look to debug the issue. Any thoughts?
Craig Sande AE7I Node 40586
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
Craig Sande -
Jim Duuuude