Re: [App_rpt-users] DMKx Uri Problem
I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote: I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-) Thanks, Bob k6ecm 73 Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello,
What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Appreciate all the help! Please keep it coming! Need to fix this or reload. -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote: I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-) Thanks, Bob k6ecm 73 Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello,
What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I have been using Dial since its release and have no issues with the URI of course this is with the PC side but essentially the software is fairly close in both distributions.. Special shout out to Steve N4IRS he did a great job moving us away from Acid.. As far as tuning and adjusting which node you want to be connected to that URI I might suggest if your not already to use radio-tune-menu Tab works if you get to radio- usually for auto complete... There you can adjust audio levels an swap URI with node numbers etc... Make sure you save before exiting the menu.. I am not sure if this works in Dial but in Acid days I remember modify the node number conf file that had been created via the radio-tune-menu up at the top of the file it use to point to the USB location I thought been awhile.. By chance are you new to Linux if so I did create some videos they are kinda long but they have been useful with others.. 73 Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com Phone: Fax: http://www.lorentedford.com http://kc9zhv.com Sent from Droid Turbo from Verizon wireless network On Feb 11, 2017 8:01 AM, "Bruce B Isaacson" <ike@jmbruce.biz> wrote: Appreciate all the help! Please keep it coming! Need to fix this or reload. -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote: I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-) Thanks, Bob k6ecm 73 Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello,
What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thank you for the info; I will give it a try. From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Loren Tedford Sent: Saturday, February 11, 2017 12:32 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] DMKx Uri Problem I have been using Dial since its release and have no issues with the URI of course this is with the PC side but essentially the software is fairly close in both distributions.. Special shout out to Steve N4IRS he did a great job moving us away from Acid.. As far as tuning and adjusting which node you want to be connected to that URI I might suggest if your not already to use radio-tune-menu Tab works if you get to radio- usually for auto complete... There you can adjust audio levels an swap URI with node numbers etc... Make sure you save before exiting the menu.. I am not sure if this works in Dial but in Acid days I remember modify the node number conf file that had been created via the radio-tune-menu up at the top of the file it use to point to the USB location I thought been awhile.. By chance are you new to Linux if so I did create some videos they are kinda long but they have been useful with others.. 73 Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com Phone: Fax: http://www.lorentedford.com http://kc9zhv.com Sent from Droid Turbo from Verizon wireless network On Feb 11, 2017 8:01 AM, "Bruce B Isaacson" <ike@jmbruce.biz> wrote: Appreciate all the help! Please keep it coming! Need to fix this or reload. -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote: I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-) Thanks, Bob k6ecm 73 Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello,
What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Bruce, A reload will NOT fix your issue. We have found a bug in uridiag. 1: Make sure asterisk is NOT running when you want to use uridiag. It will fail. 2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program. 3: The bug only affects uridiag, not asterisk 4: I will be publishing a fix for uridiag later today or tomorrow. 5: if you want to test uridiag before the fix. stop asterisk run alsamixer press F6 to select the C-Media sound device use the up arrow to set the Headphone level to 100<>100 (100%) press esc to exit alsamixer run uridiag and test again. If you re-run asterisk then uridiag, uridiag will fail. You will have to reset the level to 100% The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly. The fix will solve this going forward. 73, Steve N4IRS On 02/11/2017 09:00 AM, Bruce B Isaacson wrote:
Appreciate all the help! Please keep it coming! Need to fix this or reload.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem
I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-)
Thanks, Bob k6ecm 73
Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello, What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Steve; Ok, I will give it a try. Thanks; I will let you know how it goes. Bruce -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 1:39 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] DMKx Uri Problem Bruce, A reload will NOT fix your issue. We have found a bug in uridiag. 1: Make sure asterisk is NOT running when you want to use uridiag. It will fail. 2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program. 3: The bug only affects uridiag, not asterisk 4: I will be publishing a fix for uridiag later today or tomorrow. 5: if you want to test uridiag before the fix. stop asterisk run alsamixer press F6 to select the C-Media sound device use the up arrow to set the Headphone level to 100<>100 (100%) press esc to exit alsamixer run uridiag and test again. If you re-run asterisk then uridiag, uridiag will fail. You will have to reset the level to 100% The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly. The fix will solve this going forward. 73, Steve N4IRS On 02/11/2017 09:00 AM, Bruce B Isaacson wrote:
Appreciate all the help! Please keep it coming! Need to fix this or reload.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem
I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-)
Thanks, Bob k6ecm 73
Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello, What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Steve, Uridiag worked perfectly and it passes all tests and now comes the however; when I do a simpleusb-tune-menu Set RX Voice Level (Using Display) I get nothing. I tested the output from the radio and it is making it just fine to the URIx but not beyond that. It appears to me that all the other test work just fine including the Set Transmit A and B level. Hear the tones just fine. Currently the RX Channel is set at 650. So it appears that all is fine going out to the radio but not into the node. When I access the node using the computer I hear it just fine but not my HT when I transmit back. Sort of repeating myself here. Actually back to square 1. Any ideas I can try would be greatly appreciated. Thanks for the help. -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 1:39 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] DMKx Uri Problem Bruce, A reload will NOT fix your issue. We have found a bug in uridiag. 1: Make sure asterisk is NOT running when you want to use uridiag. It will fail. 2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program. 3: The bug only affects uridiag, not asterisk 4: I will be publishing a fix for uridiag later today or tomorrow. 5: if you want to test uridiag before the fix. stop asterisk run alsamixer press F6 to select the C-Media sound device use the up arrow to set the Headphone level to 100<>100 (100%) press esc to exit alsamixer run uridiag and test again. If you re-run asterisk then uridiag, uridiag will fail. You will have to reset the level to 100% The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly. The fix will solve this going forward. 73, Steve N4IRS On 02/11/2017 09:00 AM, Bruce B Isaacson wrote:
Appreciate all the help! Please keep it coming! Need to fix this or reload.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem
I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-)
Thanks, Bob k6ecm 73
Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello, What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I would check your COS and CTCSS settings in the channel simpleusb.conf On 02/12/2017 04:59 PM, Bruce B Isaacson wrote:
Steve, Uridiag worked perfectly and it passes all tests and now comes the however; when I do a simpleusb-tune-menu Set RX Voice Level (Using Display) I get nothing. I tested the output from the radio and it is making it just fine to the URIx but not beyond that. It appears to me that all the other test work just fine including the Set Transmit A and B level. Hear the tones just fine. Currently the RX Channel is set at 650.
So it appears that all is fine going out to the radio but not into the node. When I access the node using the computer I hear it just fine but not my HT when I transmit back. Sort of repeating myself here. Actually back to square 1.
Any ideas I can try would be greatly appreciated.
Thanks for the help.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 1:39 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] DMKx Uri Problem
Bruce,
A reload will NOT fix your issue.
We have found a bug in uridiag.
1: Make sure asterisk is NOT running when you want to use uridiag. It will fail.
2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program.
3: The bug only affects uridiag, not asterisk
4: I will be publishing a fix for uridiag later today or tomorrow.
5: if you want to test uridiag before the fix.
stop asterisk
run alsamixer
press F6 to select the C-Media sound device
use the up arrow to set the Headphone level to 100<>100 (100%)
press esc to exit alsamixer
run uridiag and test again.
If you re-run asterisk then uridiag, uridiag will fail. You will have to reset the level to 100%
The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly.
The fix will solve this going forward.
73, Steve N4IRS
On 02/11/2017 09:00 AM, Bruce B Isaacson wrote:
Appreciate all the help! Please keep it coming! Need to fix this or reload.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem
I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-)
Thanks, Bob k6ecm 73
Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello, What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Steve, Sorry but I am lost! I have changed carrierfrom = usb and ctcssfrom = usb every possible way and having it this way works perfectly in simpleusb-tune-menu however I lose the connection between the allstarlink node to the radio but I can hear my HT at the Webtransceiver. I have looked on Allstarlink.org but the simpleusb configuration appears to be antiquated. See my file and maybe you can tell me where I am going wrong. Thank you; I certainly appreciate your help. Bruce ; SimpleUSB configuration [general] [usb] eeprom=0 hdwtype=0 ; Leave this set to 0 for USB sound fobs modified using ; the instructions from usbfob.pdf. Use a setting of ; 1 is for Dingotel/Sph interfaces. ; Receiver parameters rxboost = 1 ; 0 = 20db attenuator inserted, 1= 20db attenuator removed ; Set to 1 for additonal gain if using a low-level receiver output carrierfrom = usb ; no,usb,usbinvert ; no - no carrier detection at all ; usb - from the COR line on the USB sound fob (Active high) ; usbinvert - from the inverted COR line on the USB sound fob (Active low) ctcssfrom = usb ; no,usb,usbinvert ; no - CTCSS decoding, system will be carrier squelch ; usb - CTCSS decoding using input from USB sound fob (Active high) ; usbinvert - from the inverted CTCSS line on the USB sound fob (Active low) ;deemphasis =yes ; enable de-emphasis (input from discriminator) ;plfilter = no ; enable PL filter ;rxondelay = 0 ; number of 20ms intervals to hold off receiver turn-on indication ; Transmitter parameters txmixa = voice ; Left channel output (A): no,voice,tone,composite,auxvoice ; no - Do not output anything ; voice - output voice only txmixb = voice ; Right channel output (B): no,voice,tone,composite,auxvoice ; See txmixa above. txboost = 0 invertptt = 0 ; Invert PTT 0 = ground to transmit, 1 = open to transmit ; This is the collector lead of the 2n4401 on the modified ; usb sound fob. ; please refer to the howto for the procedure to do this. -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 5:05 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem I would check your COS and CTCSS settings in the channel simpleusb.conf On 02/12/2017 04:59 PM, Bruce B Isaacson wrote:
Steve, Uridiag worked perfectly and it passes all tests and now comes the however; when I do a simpleusb-tune-menu Set RX Voice Level (Using Display) I get nothing. I tested the output from the radio and it is making it just fine to the URIx but not beyond that. It appears to me that all the other test work just fine including the Set Transmit A and B level. Hear the tones just fine. Currently the RX Channel is set at 650.
So it appears that all is fine going out to the radio but not into the node. When I access the node using the computer I hear it just fine but not my HT when I transmit back. Sort of repeating myself here. Actually back to square 1.
Any ideas I can try would be greatly appreciated.
Thanks for the help.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 1:39 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] DMKx Uri Problem
Bruce,
A reload will NOT fix your issue.
We have found a bug in uridiag.
1: Make sure asterisk is NOT running when you want to use uridiag. It will fail.
2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program.
3: The bug only affects uridiag, not asterisk
4: I will be publishing a fix for uridiag later today or tomorrow.
5: if you want to test uridiag before the fix.
stop asterisk
run alsamixer
press F6 to select the C-Media sound device
use the up arrow to set the Headphone level to 100<>100 (100%)
press esc to exit alsamixer
run uridiag and test again.
If you re-run asterisk then uridiag, uridiag will fail. You will have to reset the level to 100%
The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly.
The fix will solve this going forward.
73, Steve N4IRS
On 02/11/2017 09:00 AM, Bruce B Isaacson wrote:
Appreciate all the help! Please keep it coming! Need to fix this or reload.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem
I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-)
Thanks, Bob k6ecm 73
Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello, What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
We are in the process of updating the drupal. I will also be updating the configs on allstarlink.org. In the meantime, here is a link to the sample config for simpleusb in DIAL. <https://github.com/N4IRS/AllStar/blob/master/configs/simpleusb.conf> On 02/12/2017 08:26 PM, Bruce B Isaacson wrote:
Steve, Sorry but I am lost! I have changed carrierfrom = usb and ctcssfrom = usb every possible way and having it this way works perfectly in simpleusb-tune-menu however I lose the connection between the allstarlink node to the radio but I can hear my HT at the Webtransceiver.
I have looked on Allstarlink.org but the simpleusb configuration appears to be antiquated. See my file and maybe you can tell me where I am going wrong.
Thank you; I certainly appreciate your help.
Bruce
; SimpleUSB configuration
[general]
[usb]
eeprom=0
hdwtype=0 ; Leave this set to 0 for USB sound fobs modified using ; the instructions from usbfob.pdf. Use a setting of ; 1 is for Dingotel/Sph interfaces.
; Receiver parameters
rxboost = 1 ; 0 = 20db attenuator inserted, 1= 20db attenuator removed ; Set to 1 for additonal gain if using a low-level receiver output
carrierfrom = usb ; no,usb,usbinvert ; no - no carrier detection at all ; usb - from the COR line on the USB sound fob (Active high) ; usbinvert - from the inverted COR line on the USB sound fob (Active low)
ctcssfrom = usb ; no,usb,usbinvert ; no - CTCSS decoding, system will be carrier squelch ; usb - CTCSS decoding using input from USB sound fob (Active high) ; usbinvert - from the inverted CTCSS line on the USB sound fob (Active low)
;deemphasis =yes ; enable de-emphasis (input from discriminator)
;plfilter = no ; enable PL filter
;rxondelay = 0 ; number of 20ms intervals to hold off receiver turn-on indication
; Transmitter parameters
txmixa = voice ; Left channel output (A): no,voice,tone,composite,auxvoice ; no - Do not output anything ; voice - output voice only
txmixb = voice ; Right channel output (B): no,voice,tone,composite,auxvoice ; See txmixa above.
txboost = 0
invertptt = 0 ; Invert PTT 0 = ground to transmit, 1 = open to transmit ; This is the collector lead of the 2n4401 on the modified ; usb sound fob. ; please refer to the howto for the procedure to do this.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 5:05 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
I would check your COS and CTCSS settings in the channel simpleusb.conf
On 02/12/2017 04:59 PM, Bruce B Isaacson wrote:
Steve, Uridiag worked perfectly and it passes all tests and now comes the however; when I do a simpleusb-tune-menu Set RX Voice Level (Using Display) I get nothing. I tested the output from the radio and it is making it just fine to the URIx but not beyond that. It appears to me that all the other test work just fine including the Set Transmit A and B level. Hear the tones just fine. Currently the RX Channel is set at 650.
So it appears that all is fine going out to the radio but not into the node. When I access the node using the computer I hear it just fine but not my HT when I transmit back. Sort of repeating myself here. Actually back to square 1.
Any ideas I can try would be greatly appreciated.
Thanks for the help.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 1:39 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] DMKx Uri Problem
Bruce,
A reload will NOT fix your issue.
We have found a bug in uridiag.
1: Make sure asterisk is NOT running when you want to use uridiag. It will fail.
2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program.
3: The bug only affects uridiag, not asterisk
4: I will be publishing a fix for uridiag later today or tomorrow.
5: if you want to test uridiag before the fix.
stop asterisk
run alsamixer
press F6 to select the C-Media sound device
use the up arrow to set the Headphone level to 100<>100 (100%)
press esc to exit alsamixer
run uridiag and test again.
If you re-run asterisk then uridiag, uridiag will fail. You will have to reset the level to 100%
The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly.
The fix will solve this going forward.
73, Steve N4IRS
On 02/11/2017 09:00 AM, Bruce B Isaacson wrote:
Appreciate all the help! Please keep it coming! Need to fix this or reload.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem
I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-)
Thanks, Bob k6ecm 73
Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello, What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hi Steve, When I run asterisk vvv -r and then connect from Allstar to the radio via "Key (Transmit) I get the following: ”Connected to Asterisk 1538 currently running on JamestownNY (pid = 2491) [Feb 13 11:45:46] WARNING[2502]: chan_iax2.c:9454 socket_process: Call on IAX2/allstar-public-923 is already up, can't start on it" Still having a connection from Allstar Web Tranceiver to the radio but not back to Allstar Tranceiver. I did replace the simpleusb.conf with the one provided by you without and change in operation. Not sure where to look next. Your guidance will be greatly appreciated. Bruce -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 8:31 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] DMKx Uri Problem We are in the process of updating the drupal. I will also be updating the configs on allstarlink.org. In the meantime, here is a link to the sample config for simpleusb in DIAL. <https://github.com/N4IRS/AllStar/blob/master/configs/simpleusb.conf> On 02/12/2017 08:26 PM, Bruce B Isaacson wrote:
Steve, Sorry but I am lost! I have changed carrierfrom = usb and ctcssfrom = usb every possible way and having it this way works perfectly in simpleusb-tune-menu however I lose the connection between the allstarlink node to the radio but I can hear my HT at the Webtransceiver.
I have looked on Allstarlink.org but the simpleusb configuration appears to be antiquated. See my file and maybe you can tell me where I am going wrong.
Thank you; I certainly appreciate your help.
Bruce
; SimpleUSB configuration
[general]
[usb]
eeprom=0
hdwtype=0 ; Leave this set to 0 for USB sound fobs modified using ; the instructions from usbfob.pdf. Use a setting of ; 1 is for Dingotel/Sph interfaces.
; Receiver parameters
rxboost = 1 ; 0 = 20db attenuator inserted, 1= 20db attenuator removed ; Set to 1 for additonal gain if using a low-level receiver output
carrierfrom = usb ; no,usb,usbinvert ; no - no carrier detection at all ; usb - from the COR line on the USB sound fob (Active high) ; usbinvert - from the inverted COR line on the USB sound fob (Active low)
ctcssfrom = usb ; no,usb,usbinvert ; no - CTCSS decoding, system will be carrier squelch ; usb - CTCSS decoding using input from USB sound fob (Active high) ; usbinvert - from the inverted CTCSS line on the USB sound fob (Active low)
;deemphasis =yes ; enable de-emphasis (input from discriminator)
;plfilter = no ; enable PL filter
;rxondelay = 0 ; number of 20ms intervals to hold off receiver turn-on indication
; Transmitter parameters
txmixa = voice ; Left channel output (A): no,voice,tone,composite,auxvoice ; no - Do not output anything ; voice - output voice only
txmixb = voice ; Right channel output (B): no,voice,tone,composite,auxvoice ; See txmixa above.
txboost = 0
invertptt = 0 ; Invert PTT 0 = ground to transmit, 1 = open to transmit ; This is the collector lead of the 2n4401 on the modified ; usb sound fob. ; please refer to the howto for the procedure to do this.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 5:05 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
I would check your COS and CTCSS settings in the channel simpleusb.conf
On 02/12/2017 04:59 PM, Bruce B Isaacson wrote:
Steve, Uridiag worked perfectly and it passes all tests and now comes the however; when I do a simpleusb-tune-menu Set RX Voice Level (Using Display) I get nothing. I tested the output from the radio and it is making it just fine to the URIx but not beyond that. It appears to me that all the other test work just fine including the Set Transmit A and B level. Hear the tones just fine. Currently the RX Channel is set at 650.
So it appears that all is fine going out to the radio but not into the node. When I access the node using the computer I hear it just fine but not my HT when I transmit back. Sort of repeating myself here. Actually back to square 1.
Any ideas I can try would be greatly appreciated.
Thanks for the help.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 1:39 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] DMKx Uri Problem
Bruce,
A reload will NOT fix your issue.
We have found a bug in uridiag.
1: Make sure asterisk is NOT running when you want to use uridiag. It will fail.
2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program.
3: The bug only affects uridiag, not asterisk
4: I will be publishing a fix for uridiag later today or tomorrow.
5: if you want to test uridiag before the fix.
stop asterisk
run alsamixer
press F6 to select the C-Media sound device
use the up arrow to set the Headphone level to 100<>100 (100%)
press esc to exit alsamixer
run uridiag and test again.
If you re-run asterisk then uridiag, uridiag will fail. You will have to reset the level to 100%
The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly.
The fix will solve this going forward.
73, Steve N4IRS
On 02/11/2017 09:00 AM, Bruce B Isaacson wrote:
Appreciate all the help! Please keep it coming! Need to fix this or reload.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Saturday, February 11, 2017 5:56 AM To: Bob; Users Subject: Re: [App_rpt-users] DMKx Uri Problem
I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. Works fine on a X86. Sent via smoke signal (AT&T) On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-)
Thanks, Bob k6ecm 73
Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello, What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Bruce B Isaacson -
Loren Tedford -
Steve Zingman