Re: [App_rpt-users] Zoiper Android and Acid
Thanks for the info. I must be doing something very stupid. Can not get Zoiper to register, get error: NOTICE[2761]: chan_iax2.c:6839 register_verify: No registration for peer "xyz" This occurs both over the 3G network or my local WLAN. i have IAXRPT working fine. Any ideas? Ed W8VT Node 27849 On 07/17/2012 12:29 PM, DARN SIMPLE | N0PCO wrote:
Hello Ed, Zoiper should be fairly easy to get set up on Android, you'll just need to add the extension information for your RF Gateway once you have things set up and ready to go.
For a quick reference take a look at: http://scripts.asteriskradio.net follow Scripts and Things - RF Gateways ... there's a link for the PBX 2 RF Gateway Guide. Towards the end of the document it talks about "RF Gateway to SIP Phone" the same procedures can be done with IAX (just add the information to the /etc/asterisk/iax.conf file instead of the /etc/asterisk/sip.conf file).
Mars - N0PCO ALERTradio ERC www.alertradio.net | www.asteriskradio.net | www.darnsimple.net Technology resources for public safety. It's all about being ready.
ALN: 2095 KC0SOK UHF 443.275+ 156.7
On 07/17/2012 09:06 AM, Ed Wilhelm wrote:
Looking for information on configuring Zoiper on Android and app_rpt on Acid distro. Found some stuff on the Xipar distro but don't know how much difference there is between them. Any assistance greatly appreciated.
Ed W8VT Node 27849 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (1)
-
Ed Wilhelm