Greetings, A few guys have been trying to help me but thought I would post to see if I get something different. No one can answer this problem. I can not adjust the setting on my fob with simpleusb-tune-menu here is simpleusb.conf [usb27539] hdwtype=0 rxboost=0 txboost=0 carrierfrom=usbinvert ctcssfrom=no txmixa=no txmixb=no invertptt=0 duplex=1 rxondelay=0 eeprom=0 here is simpleusb_tune_usb27539.conf [usb27539] ; name=usb27539 ; devicenum=1 devstr=4-2 rxmixerset=200 txmixaset=0 txmixbset=0 notice everything on the tx side is set to 0. I still get audio. If I put it on 999 it still sounds the same. I can also try and change the rx audio and it does move either. If I change to usbradio, it is opposite. I can not get any audio to go in or out. But cos and ptt works. Any ideas? Ryan
What is in your usbradio.conf file. You showed the tune file, but not the usbradio.conf file. Corey N3FE From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Ryan Collier Sent: Friday, July 20, 2012 12:41 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Simpleusb problem.... Greetings, A few guys have been trying to help me but thought I would post to see if I get something different. No one can answer this problem. I can not adjust the setting on my fob with simpleusb-tune-menu here is simpleusb.conf [usb27539] hdwtype=0 rxboost=0 txboost=0 carrierfrom=usbinvert ctcssfrom=no txmixa=no txmixb=no invertptt=0 duplex=1 rxondelay=0 eeprom=0 here is simpleusb_tune_usb27539.conf [usb27539] ; name=usb27539 ; devicenum=1 devstr=4-2 rxmixerset=200 txmixaset=0 txmixbset=0 notice everything on the tx side is set to 0. I still get audio. If I put it on 999 it still sounds the same. I can also try and change the rx audio and it does move either. If I change to usbradio, it is opposite. I can not get any audio to go in or out. But cos and ptt works. Any ideas? Ryan -- This message was scanned and is believed to be clean. Click here to report this message as spam.<%0d%0ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=174C7221C.A8AA4%0d%0a>
Wow, forget I even sent that last email... LONG DAY! Corey N3FE From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Corey Dean Sent: Friday, July 20, 2012 4:11 PM To: Ryan Collier; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Simpleusb problem.... What is in your usbradio.conf file. You showed the tune file, but not the usbradio.conf file. Corey N3FE From: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org]<mailto:[mailto:app_rpt-users-bounces@ohnosec.org]> On Behalf Of Ryan Collier Sent: Friday, July 20, 2012 12:41 AM To: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Simpleusb problem.... Greetings, A few guys have been trying to help me but thought I would post to see if I get something different. No one can answer this problem. I can not adjust the setting on my fob with simpleusb-tune-menu here is simpleusb.conf [usb27539] hdwtype=0 rxboost=0 txboost=0 carrierfrom=usbinvert ctcssfrom=no txmixa=no txmixb=no invertptt=0 duplex=1 rxondelay=0 eeprom=0 here is simpleusb_tune_usb27539.conf [usb27539] ; name=usb27539 ; devicenum=1 devstr=4-2 rxmixerset=200 txmixaset=0 txmixbset=0 notice everything on the tx side is set to 0. I still get audio. If I put it on 999 it still sounds the same. I can also try and change the rx audio and it does move either. If I change to usbradio, it is opposite. I can not get any audio to go in or out. But cos and ptt works. Any ideas? Ryan -- This message was scanned and is believed to be clean. Click here to report this message as spam.<%0d%0ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=174C7221C.A8AA4%0d%0a> -- This message was scanned and is believed to be clean. Click here to report this message as spam.<%0d%0ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=80928221C.ABDDA%0d%0a>
What distro are you running, ACID, LIMEY or something else? K0JSC ________________________________ From: Corey Dean [mailto:n3fe@repeater.net] Sent: Friday, July 20, 2012 2:15 PM To: Corey Dean; Ryan Collier; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Simpleusb problem.... Wow, forget I even sent that last email... LONG DAY! Corey N3FE From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Corey Dean Sent: Friday, July 20, 2012 4:11 PM To: Ryan Collier; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Simpleusb problem.... What is in your usbradio.conf file. You showed the tune file, but not the usbradio.conf file. Corey N3FE From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] <mailto:%5bmailto:app_rpt-users-bounces@ohnosec.org%5d> On Behalf Of Ryan Collier Sent: Friday, July 20, 2012 12:41 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Simpleusb problem.... Greetings, A few guys have been trying to help me but thought I would post to see if I get something different. No one can answer this problem. I can not adjust the setting on my fob with simpleusb-tune-menu here is simpleusb.conf [usb27539] hdwtype=0 rxboost=0 txboost=0 carrierfrom=usbinvert ctcssfrom=no txmixa=no txmixb=no invertptt=0 duplex=1 rxondelay=0 eeprom=0 here is simpleusb_tune_usb27539.conf [usb27539] ; name=usb27539 ; devicenum=1 devstr=4-2 rxmixerset=200 txmixaset=0 txmixbset=0 notice everything on the tx side is set to 0. I still get audio. If I put it on 999 it still sounds the same. I can also try and change the rx audio and it does move either. If I change to usbradio, it is opposite. I can not get any audio to go in or out. But cos and ptt works. Any ideas? Ryan -- This message was scanned and is believed to be clean. Click here to report this message as spam. -- This message was scanned and is believed to be clean. Click here to report this message as spam.
participants (3)
-
Corey Dean -
Jeffrey S. Carrier -
Ryan Collier