When you run the install acid cd and the script asks if you want a static or dynamic Ip choose dynamic. If you chooses static the namserver does not get set and the pc cannot find the site for downloads. If you choose dynamic (DHCP) then you should be able to download. I always use dynamic Ip when doing new install from the Acid disc. After i have the default node built then i change it over manually to a static Ip and set the nameserver manually. Just something to try. Jon VA3RQ On 3/2/2014 11:21 AM, mike@midnighteng.com wrote:

Well, I knew that I would get a lot of replies for the simple stuff.

Yes I did: Burn 6 different CD's using different make cd-r's re-download the iso on other system do a checksum on the iso Verify IP connection. Try the original disk from install last year. Try 2 other computers for install

The system was a working system, All I did was swap the hard drive and install again. only i mistakenly re-installed the original drive.

Found a back-up drive and slip it in and updated the conf's and runs like a charm but I still would like to make this work for myself and a new server for new nodes.

I'll probably clone the drive and change the vol label and work from that.

I just wanted to verify the download server was working before I copy drive images to the folks I was helping.

So if some of you say it's working, I'll take your word for it. I tried to reach it manually without success.

Thanks

...mike/kb8jnm

-------- Original Message -------- Subject: Re: [App_rpt-users] ACID install -- download site not working all week From: Doug Bade <kd8b@thebades.net <mailto:kd8b@thebades.net>> Date: Sun, March 02, 2014 10:29 am To: Angelo Glorioso <n5uxt@hotmail.com <mailto:n5uxt@hotmail.com>> Cc:

I have found in many cases of script failure was due to Ethernet hardware not recognized by the default initial install. I keep a linksys usb300 around for installing and after all the CentOS patching, the main nic is usually detected and I can remove the USB nic.

/Sent from my Verizon Wireless 4G LTE DROID/

Angelo Glorioso <n5uxt@hotmail.com <mailto:n5uxt@hotmail.com>> wrote:

*Hi Mike,* ** * I found that I needed to run a cd surface check each time to verify the cd was good. You may have the same problem. Double check the cd. You may have to download and burn another one.* ** *73 de Angelo* **

----- Original Message ----- *From:* Chris Andrist <mailto:chris@yeahmon.net> *To:* app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> *Sent:* Sunday, March 02, 2014 8:55 AM *Subject:* Re: [App_rpt-users] ACID install -- download site not working all week

The site seems to be working fine for me. You might try downloading the ISO and burning it again.

-- Regards,

Chris Andrist, KC7WSU

On Mar 2, 2014, at 4:07 AM, "mike@midnighteng.com <mailto:mike@midnighteng.com>" <mike@midnighteng.com <mailto:mike@midnighteng.com>> wrote:

...

I was helping a few folks with their install and all of them got hung-up on the acid install when the script called for phase1 download.

I even changed my hard drive and tried it on my system... Problem being I did not change the hard drive (really reinstalled original drive) and wiped my install.

Can anyone verify what I'm seeing on three networks ? (download site broke)

...mike/kb8jnm

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.