Bryan, Do you get the crash when you start dahdi or when you modprobe pciradio? Steve On 1/27/2015 9:51 AM, app_rpt-users-request@ohnosec.org wrote:

Message: 2 Date: Tue, 27 Jan 2015 03:38:27 -0500 From: Bryan Fields<Bryan@bryanfields.net> To:"app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] compile on debian (was More than 4 nodes on a PC) Message-ID:<54C74E83.60203@bryanfields.net> Content-Type: text/plain; charset=ISO-8859-1

On 1/27/15, 1:04 AM, Doug Crompton wrote:

...

...

Bryan,

Yes you will need Dahdi source. You need to remove Zaptel stuff. I would suggest getting it from the BBB image at hamvoip.org. It already has the Allstar patches in it. It is located in /usr/src/utils/dahdi-linux-complete-2.9.1.1+2.9.1 If not you need to download that version of the code from Digium and apply the patches from the Allstar svn site. I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1+2.10.0.1) and applied the patches from ohnosec svn. hunk 3 on patch 2 needed to be applied by hand, the rest went fine.

Dahdi is compiled and installed.

I have the ohnosec svn asterisk compiled as well. Copied the sounds in place and started to configure asterisk.

I've run into a bit of a problem while loading the pciradio module however. I don't know enough about kernel coding in linux to know where to begin debugging this.

does your version of dahdi on the hamvoip.org site work ok? perhaps it's new bug in the Digium code, and I should go with yours in place of it.

-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic