Re: [App_rpt-users] compile on Debian
Pciradio. I am going to write a longer bug report once I pull it into gdb later today On January 27, 2015 2:00:59 PM EST, Steve Zingman <szingman@msgstor.com> wrote:
Bryan, Do you get the crash when you start dahdi or when you modprobe pciradio?
Steve
On 1/27/2015 9:51 AM, app_rpt-users-request@ohnosec.org wrote:
Message: 2 Date: Tue, 27 Jan 2015 03:38:27 -0500 From: Bryan Fields<Bryan@bryanfields.net> To:"app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] compile on debian (was More than 4 nodes on a PC) Message-ID:<54C74E83.60203@bryanfields.net> Content-Type: text/plain; charset=ISO-8859-1
On 1/27/15, 1:04 AM, Doug Crompton wrote:
Bryan,
Yes you will need Dahdi source. You need to remove Zaptel stuff. I would suggest getting it from the BBB image at hamvoip.org. It already has the Allstar patches in it. It is located in /usr/src/utils/dahdi-linux-complete-2.9.1.1+2.9.1 If not you need to download that version of the code from Digium and apply the patches from the Allstar svn site. I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1+2.10.0.1) and applied the patches from ohnosec svn. hunk 3 on patch 2 needed to be applied by hand, the rest went fine.
Dahdi is compiled and installed.
I have the ohnosec svn asterisk compiled as well. Copied the sounds in place and started to configure asterisk.
I've run into a bit of a problem while loading the pciradio module however. I don't know enough about kernel coding in linux to know where to begin debugging this.
does your version of dahdi on the hamvoip.org site work ok? perhaps it's new bug in the Digium code, and I should go with yours in place of it.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Bryan Fields 727-409-1194 http://bryanfields.net
The node I am running a PCI card is still Squeeze, so it's zaptel but, Are the config files for the PCI card installed? zapata.conf in /etc/asterisk zaptel.conf in /etc also try to add "options pciradio debug=1" in /etc/modprobe.conf longshot, but worth asking. Steve On 1/27/2015 2:08 PM, Bryan Fields wrote:
Pciradio. I am going to write a longer bug report once I pull it into gdb later today
On January 27, 2015 2:00:59 PM EST, Steve Zingman <szingman@msgstor.com> wrote:
Bryan, Do you get the crash when you start dahdi or when you modprobe pciradio?
Steve
On 1/27/2015 9:51 AM, app_rpt-users-request@ohnosec.org wrote:
Message: 2 Date: Tue, 27 Jan 2015 03:38:27 -0500 From: Bryan Fields<Bryan@bryanfields.net> To:"app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] compile on debian (was More than 4 nodes on a PC) Message-ID:<54C74E83.60203@bryanfields.net> Content-Type: text/plain; charset=ISO-8859-1 On 1/27/15, 1:04 AM, Doug Crompton wrote:
Bryan, Yes you will need Dahdi source. You need to remove Zaptel stuff. I would suggest getting it from the BBB image at hamvoip.org <http://hamvoip.org>. It already has the Allstar patches in it. It is located in /usr/src/utils/dahdi-linux-complete-2.9.1.1 <http://2.9.1.1>+2.9.1 If not you need to download that version of the code from Digium and apply the patches from the Allstar svn site.
I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1 <http://2.10.0.1>+2.10.0.1 <http://2.10.0.1>) and applied the patches from ohnosec svn. hunk 3 on patch 2 needed to be applied by hand, the rest went fine. Dahdi is compiled and installed. I have the ohnosec svn asterisk compiled as well. Copied the sounds in place and started to configure asterisk. I've run into a bit of a problem while loading the pciradio module however. I don't know enough about kernel coding in linux to know where to begin debugging this. does your version of dahdi on the hamvoip.org <http://hamvoip.org> site work ok? perhaps it's new bug in the Digium code, and I should go with yours in place of it.
-- Bryan Fields 727-409-1194 http://bryanfields.net
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
participants (2)
-
Bryan Fields -
Steve Zingman