So I've gotten into the usbradio.conf file and made some changes. I've also looked at the rpt.conf I was looking at the status reporting section and depending on if I'm running acid or limey. I need to uncomment. I did a startpage search and found reference to removing # but I do not see that in the file. What am I missing? -- Apparare Scientior Paratus Communicare -N1XBM
I understand the concerns, but I am interested in trying.. I want to hook a MotoTrbo XPR4350 to my beagle board. Does anyone know which pin on the XPR is COR? Is there a CTCSS pin? Thanks for any advice, Mike kb8zgl
You want to remove the semicolon, which is the comment character used in these types of files. The # is used for comments in other areas, such as in a crontab. N5ZUA ----- Original Message ----- From: "Robert N. Newberry" <N1XBM@amsat.org> To: <app_rpt-users@ohnosec.org> Sent: Friday, September 27, 2013 9:24 PM Subject: [App_rpt-users] uncommnet
So I've gotten into the usbradio.conf file and made some changes. I've also looked at the rpt.conf I was looking at the status reporting section and depending on if I'm running acid or limey. I need to uncomment. I did a startpage search and found reference to removing # but I do not see that in the file. What am I missing? -- Apparare Scientior Paratus Communicare -N1XBM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Michael Wolthuis -
Robert N. Newberry -
Steve Agee