Steve, See <https://github.com/N4IRS/AllStar/raw/master/linode.tar> Should give you what you need. See <https://github.com/N4IRS/AllStar> for more general stuff. 73, Steve N4IRS
I would like to set up a hub for several repeater nodes. Is there a how to describing this? TIA ____________ Steven Donegan KK6IVC FCC General Class License SSCC/NORC Life Member, Car #86 www.sscc.us
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
I can tell you that it is a chram to do.. Made a node on Debian jessie in a few hour last saturday. -----Message d'origine----- From: Steve Zingman Sent: Thursday, May 14, 2015 11:25 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Any HOWTO on setting up a hub node? Steve, See <https://github.com/N4IRS/AllStar/raw/master/linode.tar> Should give you what you need. See <https://github.com/N4IRS/AllStar> for more general stuff. 73, Steve N4IRS
I would like to set up a hub for several repeater nodes. Is there a how to describing this? TIA ____________ Steven Donegan KK6IVC FCC General Class License SSCC/NORC Life Member, Car #86 www.sscc.us
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
Pete M -
Steve Zingman