Allstar activity at Dayton
I saw that the Dayton Hamvention is using Echolink and IRLP to link the repeaters coming into the Dayton Hamvention. Any Allstar activity at the Hamvention this year? 73, Eric 4Z1UG / WA6IGR Allstar Node: 28422 Check out my Podcast at: www.qsotoday.com<http://www.qsotoday.com> 4Z1UG@guth.us<mailto:4Z1UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840 Skype: ericrguth
On 5/10/2015 10:46 AM, Eric Guth wrote:
I saw that the Dayton Hamvention is using Echolink and IRLP to link the repeaters coming into the Dayton Hamvention. Any Allstar activity at the Hamvention this year?
Yes - Our repeater will be in the Hamvention flea-market and operate during flea-market hours + or -. It will be on 442.000 MHz. + offset, with a PL of 100.0 Hz. The node will be connected to the Internet using a Verizon hot-spot. To save on data, it will be connected to a hub with lots of Internet bandwidth. If you would like to connect to our node, please do so using node 2120. It should handle many concurrent connections without an issue. The Verizon network usually becomes overwhelmed, so remote connectivity can be iffy. We are in the following spaces in the western end of the flea-market: FW2370 - 2570 FW2369 - 2569 FW2368 - 2568 Stop by and say howdy! Kevin - W3KKC
You might want to consider a different frequency, as according to repeaterbook.com: 442.0000+ Dayton Montgomery WB8HSV OPEN N5ZUA On 5/10/2015 3:31 PM, Kevin Custer wrote:
On 5/10/2015 10:46 AM, Eric Guth wrote:
I saw that the Dayton Hamvention is using Echolink and IRLP to link the repeaters coming into the Dayton Hamvention. Any Allstar activity at the Hamvention this year?
Yes -
Our repeater will be in the Hamvention flea-market and operate during flea-market hours + or -. It will be on 442.000 MHz. + offset, with a PL of 100.0 Hz. The node will be connected to the Internet using a Verizon hot-spot. To save on data, it will be connected to a hub with lots of Internet bandwidth. If you would like to connect to our node, please do so using node 2120. It should handle many concurrent connections without an issue. The Verizon network usually becomes overwhelmed, so remote connectivity can be iffy.
We are in the following spaces in the western end of the flea-market: FW2370 - 2570 FW2369 - 2569 FW2368 - 2568
Stop by and say howdy!
Kevin - W3KKC
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 5/10/2015 5:28 PM, Steve Gee wrote:
You might want to consider a different frequency, as according to repeaterbook.com:
442.0000+ Dayton Montgomery WB8HSV OPEN
We have co-existed with this repeater for years - like 10 years. Our repeater will be running 200 mW and only be in operation during flea-market hours. Unless this repeater has changed its profile, or Trustee, there shouldn't be a problem. That said, I do have another set of ICOM's and can change frequencies if there is. I'll have my HP VNA to do duplexer tuning, in case someone wants one tuned... Kevin - W3KKC
We just installed 442.3500+ 107.2 In the north hall again this year.. It is connected to our 28236 hub at the moment.. Which I might connect to my *USA* and 9369 hubs as well.. but it’s hard tied to 28236.. This year we paid for the ethernet drop from the arena vs 4g cards… but will see how that lasts… getting about 8mbps down and 800kbps up… might need to change the settings on my rtcm we are using this time this year… Also have an APRS i-gate again in the package running in the north hall.. W8FSM-14.. Our DMR is on it’s way down this evening as well.. 444.7000+ CC1 S2G52 is where we will be.. -- Fredric Moses - W8FSM - WQOG498 fred@moses.bz
On May 10, 2015, at 10:46, Eric Guth <eric@efratnetworks.com> wrote:
I saw that the Dayton Hamvention is using Echolink and IRLP to link the repeaters coming into the Dayton Hamvention. Any Allstar activity at the Hamvention this year?
73,
Eric 4Z1UG / WA6IGR Allstar Node: 28422 Check out my Podcast at: www.qsotoday.com <http://www.qsotoday.com/> 4Z1UG@guth.us <mailto:4Z1UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840
Skype: ericrgut
I would like to set up a hub for several repeater nodes. Is there a how to describing this? TIA ____________ Steven Donegan KK6IVC FCC General Class License SSCC/NORC Life Member, Car #86 www.sscc.us
participants (5)
-
Eric Guth -
Fredric Moses -
Kevin Custer -
Steve Agee -
Steven Donegan