Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it up. I didn’t find any info on the wiki. Thanks, Bob K6ECM Sent from iPad
Bob, this is not a matter of ASL supporting it but rather a matter of the underlying operating system. I can't speak to the .img that is pre-built but I will say that if you use a vanilla version of Raspbian and go from there (following the directions of how to setup the supplicant and all the requisite things) then it should work.... https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cl... Of course not using the supplied image also may come with it's own challenges too... JJC N0PKT On Fri, Sep 28, 2018 at 3:50 PM Bob Pyke <k6ecm1@gmail.com> wrote:
Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it up. I didn’t find any info on the wiki.
Thanks, Bob K6ECM
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
ASL supports whatever IP address you obtain, however you obtain it. WIFI is not part of ASL but the operating system. Try looking for wifi on a debian 9 Pi. I ran the OS menu once, but I don't remember what it was and the wifi setup is in there. But you can find it on the web. ...mike/kb8jnm On 9/28/2018 5:50 PM, Bob Pyke wrote:
Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it up. I didn’t find any info on the wiki.
Thanks, Bob K6ECM
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
From the command line of ASL 1.01 ( repeater@repeater:/ $ ) type sudo wifi-setup the script will create the required files for the system for use. You may also manually edit the file to add additional wifi networks.
On Fri, Sep 28, 2018 at 6:01 PM Mike <mm@midnighteng.com> wrote:
ASL supports whatever IP address you obtain, however you obtain it. WIFI is not part of ASL but the operating system. Try looking for wifi on a debian 9 Pi. I ran the OS menu once, but I don't remember what it was and the wifi setup is in there. But you can find it on the web.
...mike/kb8jnm
On 9/28/2018 5:50 PM, Bob Pyke wrote:
Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it up. I didn’t find any info on the wiki.
Thanks, Bob K6ECM
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Nathan Hardman nhardman1428@gmail.com N8THN@ARRL.NET
Cool, and it works! One question. What is the protocol for multiple WiFi networks? How is the selection made? Thanks, Bob K6ECM Sent from iPad
On Sep 29, 2018, at 5:26 AM, Nate Hardman <nhardman1428@gmail.com> wrote:
From the command line of ASL 1.01 ( repeater@repeater:/ $ ) type sudo wifi-setup the script will create the required files for the system for use. You may also manually edit the file to add additional wifi networks.
On Fri, Sep 28, 2018 at 6:01 PM Mike <mm@midnighteng.com> wrote: ASL supports whatever IP address you obtain, however you obtain it. WIFI is not part of ASL but the operating system. Try looking for wifi on a debian 9 Pi. I ran the OS menu once, but I don't remember what it was and the wifi setup is in there. But you can find it on the web.
...mike/kb8jnm
On 9/28/2018 5:50 PM, Bob Pyke wrote:
Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it up. I didn’t find any info on the wiki.
Thanks, Bob K6ECM
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
Nathan Hardman nhardman1428@gmail.com N8THN@ARRL.NET
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Manually edit the /etc/wpa_supplicant.conf file. WiFi-setup script created a template for three WiFi networks. Just replace SSID and PASSWORD in the file. Sent from my iPhone
On Sep 30, 2018, at 3:33 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
Cool, and it works! One question. What is the protocol for multiple WiFi networks? How is the selection made?
Thanks, Bob K6ECM
Sent from iPad
On Sep 29, 2018, at 5:26 AM, Nate Hardman <nhardman1428@gmail.com> wrote:
From the command line of ASL 1.01 ( repeater@repeater:/ $ ) type sudo wifi-setup the script will create the required files for the system for use. You may also manually edit the file to add additional wifi networks.
On Fri, Sep 28, 2018 at 6:01 PM Mike <mm@midnighteng.com> wrote: ASL supports whatever IP address you obtain, however you obtain it. WIFI is not part of ASL but the operating system. Try looking for wifi on a debian 9 Pi. I ran the OS menu once, but I don't remember what it was and the wifi setup is in there. But you can find it on the web.
...mike/kb8jnm
On 9/28/2018 5:50 PM, Bob Pyke wrote:
Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it up. I didn’t find any info on the wiki.
Thanks, Bob K6ECM
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
Nathan Hardman nhardman1428@gmail.com N8THN@ARRL.NET
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Understand. I’ll ask it differently. Suppose I have 3 WiFi networks entered. How is each selected? I’m assuming it does not connect to three at once. Thanks, Bob K6ECM Sent from iPad
On Sep 30, 2018, at 12:40 PM, nhardman1428@gmail.com wrote:
Manually edit the /etc/wpa_supplicant.conf file. WiFi-setup script created a template for three WiFi networks. Just replace SSID and PASSWORD in the file.
Sent from my iPhone
On Sep 30, 2018, at 3:33 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
Cool, and it works! One question. What is the protocol for multiple WiFi networks? How is the selection made?
Thanks, Bob K6ECM
Sent from iPad
On Sep 29, 2018, at 5:26 AM, Nate Hardman <nhardman1428@gmail.com> wrote:
From the command line of ASL 1.01 ( repeater@repeater:/ $ ) type sudo wifi-setup the script will create the required files for the system for use. You may also manually edit the file to add additional wifi networks.
On Fri, Sep 28, 2018 at 6:01 PM Mike <mm@midnighteng.com> wrote: ASL supports whatever IP address you obtain, however you obtain it. WIFI is not part of ASL but the operating system. Try looking for wifi on a debian 9 Pi. I ran the OS menu once, but I don't remember what it was and the wifi setup is in there. But you can find it on the web.
...mike/kb8jnm
On 9/28/2018 5:50 PM, Bob Pyke wrote:
Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it up. I didn’t find any info on the wiki.
Thanks, Bob K6ECM
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
Nathan Hardman nhardman1428@gmail.com N8THN@ARRL.NET
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I believe it goes from the first with a try and then to the next until it connects, so watch the order you put them in... just think it through your situation to keep connect times shorter. Common to use #1 as the one you are most likely to connect to most of the time etc... ...mike/kb8jnm On 9/30/2018 3:52 PM, Bob Pyke wrote:
Understand. I’ll ask it differently. Suppose I have 3 WiFi networks entered. How is each selected? I’m assuming it does not connect to three at once.
Thanks, Bob K6ECM
Sent from iPad
On Sep 30, 2018, at 12:40 PM, nhardman1428@gmail.com wrote:
Manually edit the /etc/wpa_supplicant.conf file. WiFi-setup script created a template for three WiFi networks. Just replace SSID and PASSWORD in the file.
Sent from my iPhone
On Sep 30, 2018, at 3:33 PM, Bob Pyke <k6ecm1@gmail.com> wrote:
Cool, and it works! One question. What is the protocol for multiple WiFi networks? How is the selection made?
Thanks, Bob K6ECM
Sent from iPad
On Sep 29, 2018, at 5:26 AM, Nate Hardman <nhardman1428@gmail.com> wrote:
From the command line of ASL 1.01 ( repeater@repeater:/ $ ) type sudo wifi-setup the script will create the required files for the system for use. You may also manually edit the file to add additional wifi networks.
On Fri, Sep 28, 2018 at 6:01 PM Mike <mm@midnighteng.com> wrote: ASL supports whatever IP address you obtain, however you obtain it. WIFI is not part of ASL but the operating system. Try looking for wifi on a debian 9 Pi. I ran the OS menu once, but I don't remember what it was and the wifi setup is in there. But you can find it on the web.
...mike/kb8jnm
On 9/28/2018 5:50 PM, Bob Pyke wrote:
Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it up. I didn’t find any info on the wiki.
Thanks, Bob K6ECM
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
Nathan Hardman nhardman1428@gmail.com N8THN@ARRL.NET
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (5)
-
Bob Pyke -
JJC -
Mike -
Nate Hardman -
nhardman1428＠gmail.com