Fwd: Re: Help me with a load test 29993 1:00utc /9:esdst
-------- Forwarded Message -------- Subject: Re: [App_rpt-users] Help me with a load test 29993 1:00utc /9:esdst Date: Mon, 21 May 2018 21:49:17 -0400 From: Mike <mm@midnighteng.com> To: Skyler F <electricity440@gmail.com> TNX, I seem to be having issues with the host and port blockage. Again. At least it looks that way from the surface. Outbound works fine. So for all wanting to take part, Since I don't want it to be a total bomb, Perhaps connect to 29999 and will try that instance. Thanks, ...mike/kb8jnm On 5/21/2018 9:32 PM, Skyler F wrote:
Unable to connect from my node 45499
On Mon, May 21, 2018 at 7:24 PM Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Hmmm.....
Had a issue on that system from time to time...
perhaps a reboot will flush it out.
TNX
...mike/kb8jnm
On 5/21/2018 9:19 PM, Mark Johnston wrote:
I guess your not showing up in here for some reason
*root@KC7DMF:/home/repeater# cat /var/lib/asterisk/rpt_extnodes |grep 29993*
*root@KC7DMF:/home/repeater#*
Tried to manually set it using port 4569, but failed to connect, guess I'm doing something wrong.
73
Mark KC7DMF
**** North West Hub Allstar Node 2295 <http://www.markjohnston.us/nwhub> ****
"Got Root?"
How many software engineers does it take to change a light bulb? *None. It's a hardware problem.*
The best way to accelerate a computer running Windows is at 9.81 m/s².
/*_/"I get paid to support Windows, I use Linux to get work done."/_*/
On Mon, May 21, 2018 at 11:41 AM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Wondering if you would mind participating in a load test of the 29993 node
You may look at the allmon stats as we progress @ http://29993.link
that is installed on a vultr 512mb minimal instance.
I will post the cpu/mem/bandwidth stats for all to see, when available.
Along with how many were connected etc.
The goal here is to find the reasonable limits of a vps min install.
Connect up between 9 and 10pm esdst which I believe is 1am utc may 21 tonight (MONDAY )
If we don't swamp it to a crash, perhaps a little round table discussion on VPS deployments.
Thank You !
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info <http://amsatnet.info> KDØWHB electricity440@gmail.com <mailto:electricity440@gmail.com>
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Mike, Just wanted to make sure, it wasn’t something simple…Did you check to make sure you have your firewall opened up on port 4569 to accept incoming traffic via UDP? Hope that helps. 73 de K4SQI! Steve, K4SQI From: Mike Sent: Monday, May 21, 2018 9:52 PM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Fwd: Re: Help me with a load test 29993 1:00utc/9:esdst -------- Forwarded Message -------- Subject: Re: [App_rpt-users] Help me with a load test 29993 1:00utc /9:esdst Date: Mon, 21 May 2018 21:49:17 -0400 From: Mike <mm@midnighteng.com> To: Skyler F <electricity440@gmail.com> TNX, I seem to be having issues with the host and port blockage. Again. At least it looks that way from the surface. Outbound works fine. So for all wanting to take part, Since I don't want it to be a total bomb, Perhaps connect to 29999 and will try that instance. Thanks, ...mike/kb8jnm On 5/21/2018 9:32 PM, Skyler F wrote: Unable to connect from my node 45499 On Mon, May 21, 2018 at 7:24 PM Mike <mm@midnighteng.com> wrote: Hmmm..... Had a issue on that system from time to time... perhaps a reboot will flush it out. TNX ...mike/kb8jnm On 5/21/2018 9:19 PM, Mark Johnston wrote: I guess your not showing up in here for some reason root@KC7DMF:/home/repeater# cat /var/lib/asterisk/rpt_extnodes |grep 29993 root@KC7DMF:/home/repeater# Tried to manually set it using port 4569, but failed to connect, guess I'm doing something wrong. 73 Mark KC7DMF **** North West Hub Allstar Node 2295 **** "Got Root?" How many software engineers does it take to change a light bulb? None. It's a hardware problem. The best way to accelerate a computer running Windows is at 9.81 m/s². "I get paid to support Windows, I use Linux to get work done." On Mon, May 21, 2018 at 11:41 AM, Mike <mm@midnighteng.com> wrote: Wondering if you would mind participating in a load test of the 29993 node You may look at the allmon stats as we progress @ http://29993.link that is installed on a vultr 512mb minimal instance. I will post the cpu/mem/bandwidth stats for all to see, when available. Along with how many were connected etc. The goal here is to find the reasonable limits of a vps min install. Connect up between 9 and 10pm esdst which I believe is 1am utc may 21 tonight (MONDAY ) If we don't swamp it to a crash, perhaps a little round table discussion on VPS deployments. Thank You ! ...mike/kb8jnm _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Yes... I thought it was simple at first but quickly relized it was not. I shut the firewall down. I 'believe' it to be on vultrs end. I had a issue in the past about them blocking my ports. They just blanketed all my instances for one that did get out of my control. And that kept me from getting email notices of things that were going wrong on any/all the instances. Making cpu usage go up, incrementally over time as things going out were retying constantly backups between the servers and system messages to boot.... It too was a test system. But I have a problem with the fact they shut down the ports on all the instances without a message to me. And that was from issue on just 1 instance that was a strictly asterisk server. Well, will put a ticket in after I verify that is indeed the issue. But I can't get though on any port but 22. But perhaps I do not fully understand this firewall set-up in debian. Been using csf normally as of late. Anyway, thank you for the efforts. Hate to have a botched test like this. Makes folks less likely to try next time. Thank You ! 73, mike/kb8jnm On 5/21/2018 10:13 PM, Steven Blackford wrote:
Mike,
Just wanted to make sure, it wasn’t something simple…Did you check to make sure you have your firewall opened up on port 4569 to accept incoming traffic via UDP? Hope that helps. 73 de K4SQI!
Steve, K4SQI
*From: *Mike <mailto:mm@midnighteng.com> *Sent: *Monday, May 21, 2018 9:52 PM *To: *app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> *Subject: *[App_rpt-users] Fwd: Re: Help me with a load test 29993 1:00utc/9:esdst
-------- Forwarded Message --------
*Subject: *
Re: [App_rpt-users] Help me with a load test 29993 1:00utc /9:esdst
*Date: *
Mon, 21 May 2018 21:49:17 -0400
*From: *
Mike <mm@midnighteng.com> <mailto:mm@midnighteng.com>
*To: *
Skyler F <electricity440@gmail.com> <mailto:electricity440@gmail.com>
TNX,
I seem to be having issues with the host and port blockage. Again.
At least it looks that way from the surface.
Outbound works fine.
So for all wanting to take part,
Since I don't want it to be a total bomb,
Perhaps connect to 29999 and will try that instance.
Thanks,
...mike/kb8jnm
On 5/21/2018 9:32 PM, Skyler F wrote:
Unable to connect from my node 45499
On Mon, May 21, 2018 at 7:24 PM Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Hmmm.....
Had a issue on that system from time to time...
perhaps a reboot will flush it out.
TNX
...mike/kb8jnm
On 5/21/2018 9:19 PM, Mark Johnston wrote:
I guess your not showing up in here for some reason
*root@KC7DMF:/home/repeater# cat /var/lib/asterisk/rpt_extnodes |grep 29993*
*root@KC7DMF:/home/repeater#***
Tried to manually set it using port 4569, but failed to connect, guess I'm doing something wrong.
73
Mark KC7DMF
**** North West Hub Allstar Node 2295 <http://www.markjohnston.us/nwhub> ****
"Got Root?"
How many software engineers does it take to change a light bulb?
*None. It's a hardware problem.*
The best way to accelerate a computer running Windows is at 9.81 m/s².
*/_"I get paid to support Windows, I use Linux to get work done."_/*
On Mon, May 21, 2018 at 11:41 AM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Wondering if you would mind participating in a load test of the 29993 node
You may look at the allmon stats as we progress @ http://29993.link
that is installed on a vultr 512mb minimal instance.
I will post the cpu/mem/bandwidth stats for all to see, when available.
Along with how many were connected etc.
The goal here is to find the reasonable limits of a vps min install.
Connect up between 9 and 10pm esdst which I believe is 1am utc may 21 tonight (MONDAY )
If we don't swamp it to a crash, perhaps a little round table discussion on VPS deployments.
Thank You !
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
Skyler Fennell
amsatnet.info <http://amsatnet.info>
KDØWHB
electricity440@gmail.com <mailto:electricity440@gmail.com>
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Maybe you should try linode or digital ocean each is like $5/mo On Mon, May 21, 2018, 19:35 Mike <mm@midnighteng.com> wrote:
Yes... I thought it was simple at first but quickly relized it was not.
I shut the firewall down.
I 'believe' it to be on vultrs end. I had a issue in the past about them blocking my ports.
They just blanketed all my instances for one that did get out of my control.
And that kept me from getting email notices of things that were going wrong on any/all the instances.
Making cpu usage go up, incrementally over time as things going out were retying constantly backups between the servers and system messages to boot....
It too was a test system. But I have a problem with the fact they shut down the ports on all the instances without a message to me.
And that was from issue on just 1 instance that was a strictly asterisk server.
Well, will put a ticket in after I verify that is indeed the issue.
But I can't get though on any port but 22.
But perhaps I do not fully understand this firewall set-up in debian.
Been using csf normally as of late.
Anyway, thank you for the efforts. Hate to have a botched test like this.
Makes folks less likely to try next time. Thank You !
73, mike/kb8jnm
On 5/21/2018 10:13 PM, Steven Blackford wrote:
Mike,
Just wanted to make sure, it wasn’t something simple…Did you check to make sure you have your firewall opened up on port 4569 to accept incoming traffic via UDP? Hope that helps. 73 de K4SQI!
Steve, K4SQI
*From: *Mike <mm@midnighteng.com> *Sent: *Monday, May 21, 2018 9:52 PM *To: *app_rpt-users@lists.allstarlink.org *Subject: *[App_rpt-users] Fwd: Re: Help me with a load test 29993 1:00utc/9:esdst
-------- Forwarded Message --------
*Subject: *
Re: [App_rpt-users] Help me with a load test 29993 1:00utc /9:esdst
*Date: *
Mon, 21 May 2018 21:49:17 -0400
*From: *
Mike <mm@midnighteng.com> <mm@midnighteng.com>
*To: *
Skyler F <electricity440@gmail.com> <electricity440@gmail.com>
TNX,
I seem to be having issues with the host and port blockage. Again.
At least it looks that way from the surface.
Outbound works fine.
So for all wanting to take part,
Since I don't want it to be a total bomb,
Perhaps connect to 29999 and will try that instance.
Thanks,
...mike/kb8jnm
On 5/21/2018 9:32 PM, Skyler F wrote:
Unable to connect from my node 45499
On Mon, May 21, 2018 at 7:24 PM Mike <mm@midnighteng.com> wrote:
Hmmm.....
Had a issue on that system from time to time...
perhaps a reboot will flush it out.
TNX
...mike/kb8jnm
On 5/21/2018 9:19 PM, Mark Johnston wrote:
I guess your not showing up in here for some reason
*root@KC7DMF:/home/repeater# cat /var/lib/asterisk/rpt_extnodes |grep 29993*
*root@KC7DMF:/home/repeater#*
Tried to manually set it using port 4569, but failed to connect, guess I'm doing something wrong.
73
Mark KC7DMF
**** North West Hub Allstar Node 2295 <http://www.markjohnston.us/nwhub> ****
"Got Root?"
How many software engineers does it take to change a light bulb?
*None. It's a hardware problem.*
The best way to accelerate a computer running Windows is at 9.81 m/s².
*"I get paid to support Windows, I use Linux to get work done."*
On Mon, May 21, 2018 at 11:41 AM, Mike <mm@midnighteng.com> wrote:
Wondering if you would mind participating in a load test of the 29993 node
You may look at the allmon stats as we progress @ http://29993.link
that is installed on a vultr 512mb minimal instance.
I will post the cpu/mem/bandwidth stats for all to see, when available.
Along with how many were connected etc.
The goal here is to find the reasonable limits of a vps min install.
Connect up between 9 and 10pm esdst which I believe is 1am utc may 21 tonight (MONDAY )
If we don't swamp it to a crash, perhaps a little round table discussion on VPS deployments.
Thank You !
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
Skyler Fennell
amsatnet.info
KDØWHB
electricity440@gmail.com
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Connection failed from 46596 From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Steven Blackford Sent: May 21, 2018 10:13 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Fwd: Re: Help me with a load test 29993 1:00utc/9:esdst Mike, Just wanted to make sure, it wasn’t something simple…Did you check to make sure you have your firewall opened up on port 4569 to accept incoming traffic via UDP? Hope that helps. 73 de K4SQI! Steve, K4SQI From: Mike <mailto:mm@midnighteng.com> Sent: Monday, May 21, 2018 9:52 PM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] Fwd: Re: Help me with a load test 29993 1:00utc/9:esdst -------- Forwarded Message -------- Subject: Re: [App_rpt-users] Help me with a load test 29993 1:00utc /9:esdst Date: Mon, 21 May 2018 21:49:17 -0400 From: Mike <mailto:mm@midnighteng.com> <mm@midnighteng.com> To: Skyler F <mailto:electricity440@gmail.com> <electricity440@gmail.com> TNX, I seem to be having issues with the host and port blockage. Again. At least it looks that way from the surface. Outbound works fine. So for all wanting to take part, Since I don't want it to be a total bomb, Perhaps connect to 29999 and will try that instance. Thanks, ...mike/kb8jnm On 5/21/2018 9:32 PM, Skyler F wrote: Unable to connect from my node 45499 On Mon, May 21, 2018 at 7:24 PM Mike <mm@midnighteng.com <mailto:mm@midnighteng.com> > wrote: Hmmm..... Had a issue on that system from time to time... perhaps a reboot will flush it out. TNX ...mike/kb8jnm On 5/21/2018 9:19 PM, Mark Johnston wrote: I guess your not showing up in here for some reason root@KC7DMF:/home/repeater# cat /var/lib/asterisk/rpt_extnodes |grep 29993 root@KC7DMF:/home/repeater# Tried to manually set it using port 4569, but failed to connect, guess I'm doing something wrong. 73 Mark KC7DMF **** North West Hub Allstar Node 2295 <http://www.markjohnston.us/nwhub> **** "Got Root?" How many software engineers does it take to change a light bulb? None. It's a hardware problem. The best way to accelerate a computer running Windows is at 9.81 m/s². "I get paid to support Windows, I use Linux to get work done." On Mon, May 21, 2018 at 11:41 AM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com> > wrote: Wondering if you would mind participating in a load test of the 29993 node You may look at the allmon stats as we progress @ http://29993.link that is installed on a vultr 512mb minimal instance. I will post the cpu/mem/bandwidth stats for all to see, when available. Along with how many were connected etc. The goal here is to find the reasonable limits of a vps min install. Connect up between 9 and 10pm esdst which I believe is 1am utc may 21 tonight (MONDAY ) If we don't swamp it to a crash, perhaps a little round table discussion on VPS deployments. Thank You ! ...mike/kb8jnm _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Skyler Fennell amsatnet.info <http://amsatnet.info> KDØWHB electricity440@gmail.com <mailto:electricity440@gmail.com> _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
KD2NFC - Joe -
Mark Johnston -
Mike -
Steven Blackford