Re: [App_rpt-users] Error Message When Attempting to Connect
David, Try this: On the hub box: 41488 = radio@127.0.0.1:4572/41488,NONE 40968 = radio@192.168.20.243:4569/40968,NONE On the repeater box: 40968 = radio@127.0.0.1:4569/40968,NONE 41488 = radio@192.168.20.235:4572/41488,NONE 73, Steve N4IRS On 12/28/2014 12:28 PM, app_rpt-users-request@ohnosec.org wrote:
Message: 1 Date: Sun, 28 Dec 2014 10:00:41 -0700 From: "David Dean K0PWO"<david@k0pwo.com> To: "'Jim Duuuude'"<telesistant@hotmail.com>, "'Allstar app_rpt-users Group'"<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect to my hub Message-ID:<006101d022bf$d064a8a0$712df9e0$@k0pwo.com> Content-Type: text/plain; charset="utf-8"
This morning I followed the advice given by several members on the list. I added in the nodes section of both system
40968 =radio@192.168.20.1/40963,NONE <mailto:radio@192.168.20.1/40963,NONE> on the hub box
41488 =radio@192.168.20.1/41488,NONE <mailto:radio@192.168.20.1/41488,NONE> on the repeater box
And I still get connection failed error messages
Some back ground on what I have
* Comcast internet
* The Comcast supplied modem/router is bridged for modem gateway only
* ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes are currently plugged into
* Node 41488 is my hub node and has port forwarding for port 4572 which it is assigned and configured
* NODE 40968 is my repeater node and port forwarding for port 4569 which it is assigned and configured
* Both machines for the moment have ssh of 222 (default) set
* 41488 (my hub) is using static ip (on my LAN) of 192.168.20.235
* 40968 (my repeater) is using static ip (on my LAN) of 192.168.20.243
The repeater was working fine up until about a month ago when It quit connecting to any nodes.
This morning I reset my router and reconfigured anything ? no change
This morning I reformatted my repeater box and reconfigured using the Allstar Portal ? no change
Hello Steve, That worked perfectly for my node connecting to my hub which is on the same LAN. So that part is working now. However, my repeater node will still not connect outbound to any other nodes which has me stumped. However, another node was able to connect to my repeater node with an inbound connection just a few minutes ago. So any ideas as to what I should look at for my outbound node connection problem? Thanks again, David -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Zingman Sent: Sunday, December 28, 2014 11:39 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Error Message When Attempting to Connect David, Try this: On the hub box: 41488 = radio@127.0.0.1:4572/41488,NONE 40968 = radio@192.168.20.243:4569/40968,NONE On the repeater box: 40968 = radio@127.0.0.1:4569/40968,NONE 41488 = radio@192.168.20.235:4572/41488,NONE 73, Steve N4IRS On 12/28/2014 12:28 PM, app_rpt-users-request@ohnosec.org wrote:
Message: 1 Date: Sun, 28 Dec 2014 10:00:41 -0700 From: "David Dean K0PWO"<david@k0pwo.com> To: "'Jim Duuuude'"<telesistant@hotmail.com>, "'Allstar app_rpt-users Group'"<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect to my hub Message-ID:<006101d022bf$d064a8a0$712df9e0$@k0pwo.com> Content-Type: text/plain; charset="utf-8"
This morning I followed the advice given by several members on the list. I added in the nodes section of both system
40968 =radio@192.168.20.1/40963,NONE <mailto:radio@192.168.20.1/40963,NONE> on the hub box
41488 =radio@192.168.20.1/41488,NONE <mailto:radio@192.168.20.1/41488,NONE> on the repeater box
And I still get connection failed error messages
Some back ground on what I have
* Comcast internet
* The Comcast supplied modem/router is bridged for modem gateway only
* ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes are currently plugged into
* Node 41488 is my hub node and has port forwarding for port 4572 which it is assigned and configured
* NODE 40968 is my repeater node and port forwarding for port 4569 which it is assigned and configured
* Both machines for the moment have ssh of 222 (default) set
* 41488 (my hub) is using static ip (on my LAN) of 192.168.20.235
* 40968 (my repeater) is using static ip (on my LAN) of 192.168.20.243
The repeater was working fine up until about a month ago when It quit connecting to any nodes.
This morning I reset my router and reconfigured anything ? no change
This morning I reformatted my repeater box and reconfigured using the Allstar Portal ? no change
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Well, that's really interesting, because I just connected node 2002 to your node 41488, then remote controlled it to connect outbound to 2009, both of which worked just fine. try it again. Jim, WB6NIL
From: david@k0pwo.com To: szingman@msgstor.com; app_rpt-users@ohnosec.org Date: Sun, 28 Dec 2014 11:54:19 -0700 Subject: Re: [App_rpt-users] Error Message When Attempting to Connect
Hello Steve,
That worked perfectly for my node connecting to my hub which is on the same LAN. So that part is working now. However, my repeater node will still not connect outbound to any other nodes which has me stumped.
However, another node was able to connect to my repeater node with an inbound connection just a few minutes ago.
So any ideas as to what I should look at for my outbound node connection problem?
Thanks again,
David
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Zingman Sent: Sunday, December 28, 2014 11:39 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Error Message When Attempting to Connect
David, Try this:
On the hub box: 41488 = radio@127.0.0.1:4572/41488,NONE 40968 = radio@192.168.20.243:4569/40968,NONE
On the repeater box: 40968 = radio@127.0.0.1:4569/40968,NONE 41488 = radio@192.168.20.235:4572/41488,NONE
73, Steve N4IRS
On 12/28/2014 12:28 PM, app_rpt-users-request@ohnosec.org wrote:
Message: 1 Date: Sun, 28 Dec 2014 10:00:41 -0700 From: "David Dean K0PWO"<david@k0pwo.com> To: "'Jim Duuuude'"<telesistant@hotmail.com>, "'Allstar app_rpt-users Group'"<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect to my hub Message-ID:<006101d022bf$d064a8a0$712df9e0$@k0pwo.com> Content-Type: text/plain; charset="utf-8"
This morning I followed the advice given by several members on the list. I added in the nodes section of both system
40968 =radio@192.168.20.1/40963,NONE <mailto:radio@192.168.20.1/40963,NONE> on the hub box
41488 =radio@192.168.20.1/41488,NONE <mailto:radio@192.168.20.1/41488,NONE> on the repeater box
And I still get connection failed error messages
Some back ground on what I have
* Comcast internet
* The Comcast supplied modem/router is bridged for modem gateway only
* ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes are currently plugged into
* Node 41488 is my hub node and has port forwarding for port 4572 which it is assigned and configured
* NODE 40968 is my repeater node and port forwarding for port 4569 which it is assigned and configured
* Both machines for the moment have ssh of 222 (default) set
* 41488 (my hub) is using static ip (on my LAN) of 192.168.20.235
* 40968 (my repeater) is using static ip (on my LAN) of 192.168.20.243
The repeater was working fine up until about a month ago when It quit connecting to any nodes.
This morning I reset my router and reconfigured anything ? no change
This morning I reformatted my repeater box and reconfigured using the Allstar Portal ? no change
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Ok. It is now working. I reset the modem, router, and switches and the outbound connect start to work correctly. So as of right now, My simplex node and my repeater are connected to my hub and I am able to connect either my simplex node or my repeater outbound. I am not sure what it was but resetting everything seemed to clear it all up. I appreciate everyone's time and suggestions in helping with this. Thank you again. David From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, December 28, 2014 12:02 PM To: David Dean K0PWO; Steve Zingman; app_rpt mailing list Subject: RE: [App_rpt-users] Error Message When Attempting to Connect Well, that's really interesting, because I just connected node 2002 to your node 41488, then remote controlled it to connect outbound to 2009, both of which worked just fine. try it again. Jim, WB6NIL
From: david@k0pwo.com <mailto:david@k0pwo.com> To: szingman@msgstor.com <mailto:szingman@msgstor.com> ; app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Date: Sun, 28 Dec 2014 11:54:19 -0700 Subject: Re: [App_rpt-users] Error Message When Attempting to Connect
Hello Steve,
That worked perfectly for my node connecting to my hub which is on the same LAN. So that part is working now. However, my repeater node will still not connect outbound to any other nodes which has me stumped.
However, another node was able to connect to my repeater node with an inbound connection just a few minutes ago.
So any ideas as to what I should look at for my outbound node connection problem?
Thanks again,
David
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Zingman Sent: Sunday, December 28, 2014 11:39 AM To: app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect
David, Try this:
On the hub box: 41488 = radio@127.0.0.1:4572/41488,NONE <mailto:radio@127.0.0.1:4572/41488,NONE> 40968 = radio@192.168.20.243:4569/40968,NONE <mailto:radio@192.168.20.243:4569/40968,NONE>
On the repeater box: 40968 = radio@127.0.0.1:4569/40968,NONE <mailto:radio@127.0.0.1:4569/40968,NONE> 41488 = radio@192.168.20.235:4572/41488,NONE <mailto:radio@192.168.20.235:4572/41488,NONE>
73, Steve N4IRS
On 12/28/2014 12:28 PM, app_rpt-users-request@ohnosec.org <mailto:app_rpt-users-request@ohnosec.org> wrote:
Message: 1 Date: Sun, 28 Dec 2014 10:00:41 -0700 From: "David Dean K0PWO"<david@k0pwo.com <mailto:david@k0pwo.com> > To: "'Jim Duuuude'"<telesistant@hotmail.com <mailto:telesistant@hotmail.com> >, "'Allstar app_rpt-users Group'"<app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> > Subject: Re: [App_rpt-users] Error Message When Attempting to Connect to my hub Message-ID:<006101d022bf$d064a8a0$712df9e0$@k0pwo.com <mailto:006101d022bf$d064a8a0$712df9e0$@k0pwo.com> > Content-Type: text/plain; charset="utf-8"
This morning I followed the advice given by several members on the list. I added in the nodes section of both system
40968 =radio@192.168.20.1/40963,NONE <mailto:=radio@192.168.20.1/40963,NONE> <mailto:radio@192.168.20.1/40963,NONE> on the hub box
41488 =radio@192.168.20.1/41488,NONE <mailto:=radio@192.168.20.1/41488,NONE> <mailto:radio@192.168.20.1/41488,NONE> on the repeater box
And I still get connection failed error messages
Some back ground on what I have
* Comcast internet
* The Comcast supplied modem/router is bridged for modem gateway only
* ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes are currently plugged into
* Node 41488 is my hub node and has port forwarding for port 4572 which it is assigned and configured
* NODE 40968 is my repeater node and port forwarding for port 4569 which it is assigned and configured
* Both machines for the moment have ssh of 222 (default) set
* 41488 (my hub) is using static ip (on my LAN) of 192.168.20.235
* 40968 (my repeater) is using static ip (on my LAN) of 192.168.20.243
The repeater was working fine up until about a month ago when It quit connecting to any nodes.
This morning I reset my router and reconfigured anything ? no change
This morning I reformatted my repeater box and reconfigured using the Allstar Portal ? no change
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
David Dean K0PWO -
Jim Duuuude -
Steve Zingman