David, Try this: On the hub box: 41488 = radio@127.0.0.1:4572/41488,NONE 40968 = radio@192.168.20.243:4569/40968,NONE On the repeater box: 40968 = radio@127.0.0.1:4569/40968,NONE 41488 = radio@192.168.20.235:4572/41488,NONE 73, Steve N4IRS On 12/28/2014 12:28 PM, app_rpt-users-request@ohnosec.org wrote:
Message: 1 Date: Sun, 28 Dec 2014 10:00:41 -0700 From: "David Dean K0PWO"<david@k0pwo.com> To: "'Jim Duuuude'"<telesistant@hotmail.com>, "'Allstar app_rpt-users Group'"<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect to my hub Message-ID:<006101d022bf$d064a8a0$712df9e0$@k0pwo.com> Content-Type: text/plain; charset="utf-8"
This morning I followed the advice given by several members on the list. I added in the nodes section of both system
40968 =radio@192.168.20.1/40963,NONE <mailto:radio@192.168.20.1/40963,NONE> on the hub box
41488 =radio@192.168.20.1/41488,NONE <mailto:radio@192.168.20.1/41488,NONE> on the repeater box
And I still get connection failed error messages
Some back ground on what I have
* Comcast internet
* The Comcast supplied modem/router is bridged for modem gateway only
* ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes are currently plugged into
* Node 41488 is my hub node and has port forwarding for port 4572 which it is assigned and configured
* NODE 40968 is my repeater node and port forwarding for port 4569 which it is assigned and configured
* Both machines for the moment have ssh of 222 (default) set
* 41488 (my hub) is using static ip (on my LAN) of 192.168.20.235
* 40968 (my repeater) is using static ip (on my LAN) of 192.168.20.243
The repeater was working fine up until about a month ago when It quit connecting to any nodes.
This morning I reset my router and reconfigured anything ? no change
This morning I reformatted my repeater box and reconfigured using the Allstar Portal ? no change