I activated the autopatch early this morning. Because the web portal is not totally speech friendly, I had to pull some tricks to get the information I needed for manual configuration. The file I have is different than the one that is shown. If the information wasn't in my configuration files, I cut and pasted the correct lines into my configuration. Since I had to do this, maybe I might have missed something. When I bring up the patch, I get a dial tone, and I dial the number. The repeater tells me the call is connecting, then I get a call terminated message. The manual configuration information says nothing about modifying rpt.conf, but if you read the documentation it tells you to modify this file. Do I need to do this? If so, what do I need to put in there? I tried changing "context=radio" above the callerid setting to "context=pstn-out and that resulted in me getting a dial tone, and when I tried to dial I'd get a fast busy signal. Does anyone have any ideas on what I should do to fix this? Matt Roberts n9gmr@me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142