repeater-builder.com, in the motorola msf archive, has more info than you could ever need in how to interface to the MSF, including manuals, mods, tuning info, troubleshooting, RSS step-by-steps, pinouts, part numbers from mouser/digikey/newark/etc. that would be a goldmine of info. FWIW, all of the signals you may need are accessible either on the SSCB board test points or the 25 pin connector on the side of the cabinet (assuming you have a digital station). Believe it or not, the digital MSF is one of the easiest to interface to a URI. Literally can be done with 4 wires. -- Bryan Sent from my iPhone 5...No electrons were harmed in the sending of this message.

On Jul 13, 2014, at 21:02, "Robert" <robert@controlservers.net> wrote:

Can anyone tell me the size crimp pins used on the MRTI connector on a Motorola MSF repeater? Possibly a source if odd ball?

Thank you. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.